Skip Top Navigation


State Materials Laboratory
1655 S 2nd Ave
Tumwater, WA

Page maintained by:
Shannon Huber

Qualified Product List

Product Information

Manufacturer: Adhesives Technology Corp - Pompano Beach, FL

Product Name : Ultrabond HS200
    Standard Spec : GSP 6-02.2.OPT1.GR6, Resin Bonded Anchors - Adhesive

    Product Description : Resin bonded anchor system: Epoxy resin adhesive; Two-component, cartridge type; Type IV, Grade 3, Class A, B and C; Approved for use with threaded anchor rods of 3/8, 1/2, 5/8 and 3/4-inch diameters.
    Product Restriction :
    Ultrabond HS200 shall not be used for overhead applications or where the concrete temperature will exceed 125F degrees. Approved for continued listing 1-1-12. Threaded anchor rods, nuts and washers are by others and Approval per Standard Spec 1-06.1 is required.

    Acceptance Code : 3109
    Code Description : A - Visually verify the resin bonding adhesive delivered is the product that was originally submitted by the Contractor and approved from the QPL. Note 'Restrictions' when present. B - Acceptance of threaded rods, nuts, and washers shall be by satisfactory Manufacturer's Certificate of Compliance per WSDOT Standard Specification 1-06.3 for each delivery of material to the project site. Supporting mill tests or documents may also be required with this document. If the Contract contains a Buy America clause, the PEO is responsible for acquiring a Certificate of Material Origin from the Contractor.

    Last Updated : Feb 25, 2017

    Contractors with WSDOT Click here for Contractor Product Info Page