SR 530 - Mt. Baker Area BST - 2018 - Project maps

In 2018 preservation work will cover nearly 40 miles, along seven highways in Snohomish, Island, Skagit and Whatcom counties. You can see all the work zones in this map or scroll down to see each individual area.
In 2018 preservation work will cover nearly 40 miles, along seven highways in Snohomish, Island, Skagit and Whatcom counties. You can see all the work zones in this map or scroll down to see each individual area.

Snohomish County

Crews will resurface SR 530 in Arlington from just east of Stillaguamish River Bridge to the western edge of Oso.
Crews will resurface SR 530 in Arlington from just east of Stillaguamish River Bridge to the western edge of Oso.

Crews will resurface five miles of SR 531 from near Lake Goodwin to Smokey Point.
Crews will resurface five miles of SR 531 from near Lake Goodwin to Smokey Point.

Island County

The one work zone on Whidbey Island will be on SR 20 and stretch from the Coupeville ferry terminal to SR 525.
The one work zone on Whidbey Island will be on SR 20 and stretch from the Coupeville ferry terminal to SR 525.

Skagit County

Crew will resurface a 10 mile stretch of highway in on SR 9 from south of Big Lake to SR 20 in Sedro-Woolley.
Crew will resurface a 10 mile stretch of highway in on SR 9 from south of Big Lake to SR 20 in Sedro-Woolley.

Crews will also resurface a small section of SR 20/North Cascades Highway between Marblemount and Newhalem.
Crews will also resurface a small section of SR 20/North Cascades Highway between Marblemount and Newhalem.

Skagit/Whatcom County

Crews will resurface two sections of SR 11/Chuckanut Drive. One is south of Oyster Dome in Skagit County while the other is in Whatcom County from Teddy Bear Cove to Fairhaven.
Crews will resurface two sections of SR 11/Chuckanut Drive. One is south of Oyster Dome in Skagit County while the other is in Whatcom County from Teddy Bear Cove to Fairhaven.

Whatcom County

Crews will work on a two mile stretch on SR 539/Guide Meridian Road from Badger Road to H Street.
Crews will work on a two mile stretch on SR 539/Guide Meridian Road from Badger Road to H Street.

Crews will resurface an eight mile stretch of SR 542 from the Nooksack River to the Artist Point gate.
Crews will resurface an eight mile stretch of SR 542 from the Nooksack River to the Artist Point gate.