Skip Top Navigation

Weekend closure of SR 167 in Puyallup for milestone bridge move

Get Our Mobile App

  • Our Android and iPhone apps include statewide traffic cameras, travel alerts, mountain pass reports, ferry schedules and alerts, northbound Canadian border wait times and more.

Date:  Monday, June 30, 2014

Contact: Doug Adamson, WSDOT communications, 360-357-2716
Brenden Clarke, project engineer, 360-357-2606

PUYALLUP – Drivers traveling on State Route 167 during the weekend of July 11 will need to plan for delays as contractor crews working for the Washington State Department of Transportation work to move the northbound Puyallup River Bridge 60 feet to the east.

Moving the bridge will give design-build contractor, Atkinson Construction, the space they need to begin building a new northbound SR 167 span over the Puyallup River. To keep traffic moving, northbound drivers will continue to use newly relocated northbound span until construction of the replacement span is complete in late 2015.

Relocating a 379-ton steel truss bridge won’t be easy, and will require contractor crews to close SR 167 across the Puyallup River for most of the weekend.

Weekend bridge closure details
• At 9 p.m. Friday, July 11, all lanes of northbound and southbound SR 167 will close at the Puyallup River in Puyallup.
• The closure will remain in effect through 2 p.m. Sunday, July 13.
• Drivers will follow signed detour routes via SR 512.

In addition to moving the northbound bridge, contractor crews will also work to resurface the concrete along the southbound bridge deck.

How will WSDOT move the northbound Puyallup River Bridge?
Contractor crews will use a complex system of Teflon pads, steel rails and hydraulic jacks designed to slowly raise the bridge, slide it over and lower it into its final position.

The same system was used to move the replacement Skagit River bridge section into place in September, 2013. A time-lapse video of that bridge move is posted on WSDOT’s Skagit River Bridge Replacement project web site.

Crews will prepare to move the northbound bridge overnight on Friday, July 11. The actual bridge move is scheduled to begin the morning of Saturday, July 12. The move will be a slow process and will take most of the day to complete. Once the bridge has been relocated, crews will use the remainder of the weekend to pave roadway connections to both ends of the bridge and inspect it for any necessary repairs.

Earlier this year the bridge was strengthened with steel plates to ensure it could be used as a detour during construction of the new bridge.

“Our goal is to minimize impact to drivers during construction of the new bridge,” said Olympic Region Administrator Kevin Dayton. “It is an opportunity to get more use out of the old bridge while we build a new span.”

The existing northbound bridge, built in 1925, will be replaced because it is reaching the end of its useful life. In 2011, WSDOT limited trucks to the right lane.

Although the new bridge will have the same number of lanes as the existing bridge, it is being designed and constructed to accommodate additional lanes in the future if funding becomes available.

WSDOT needs help from drivers to keep traffic moving
Drivers who need to travel through Puyallup during the weekend of July 11 should create a commuting strategy:
• Allow extra time to travel along the detour.
• Travel early in the morning or later in the evening.
• Reschedule discretionary trips.
• Ride transit, carpool, or use other alternate forms of transportation.


< Go Back