Skip Top Navigation

Signals, Illumination & ITS Detail Library

The files contained on this page are meant to be viewed using WSDOT resource files. Files viewed without WSDOT resource files will be incomplete and will not print or view correctly.

Disclaimer

 

Index

 

 


 

 

 

Design Detail          Table of Contents


Barrier Details

PDF DGN Ref. No. Description of Detail Date
view dnld 1.13E Light Std. Barrier Detail split roadway level 10/05/07
Bridge Standard Drawings - Traffic Barrier Details - Bridge and Structures Office

 

Signal Details

PDF DGN Ref. No. Description of Detail Date
* Plan Sheet IS-13 Signal Plan Sheet Library 08/28/12
view dnld 2.03E Wiring Terminations - Field & Cabinet 07/17/07
view dnld 2.04E Input File & Display Panel 07/03/08
view dnld 2.05E Signal Pole & Pushbutton Pole Installation Detail 07/03/08
* Standard Plan  J-26-15 J-26.15 Signal Pole Base/Sidewalk Detail 05/17/12
view dnld 2.08E Flashing Beacon Detail 12/12/07
view dnld ---- Signal Head Display Notes 09/05/07
top

 

 

 

 

Illumination Details

PDF DGN Ref. No. Description of Detail Date
view dnld 5.06E Under-Deck Structure Mounted Luminaire 04/26/07
view dnld 5.10E Sidewalk with Steel Light Standard 06/28/07
view dnld 5.30E Light Standard Detail - No Mast Arm 04/07/05
view dnld 5.40E Highmast Luminaire - Grounding  Detail 03/23/06
view dnld 5.41E

Highmast Luminaire - Foundation Detail 03/23/06
top  

 

Junction Box Detail

PDF DGN Ref. No. Description of Detail Date
* Standard Plan 
   J-60.05-00
Existing Frame & Lid Bonding Dtl, Type 1, 2, 3, 7, 8 06/16/11
* Standard Plan 
   J-40.38-01
 
Surface Mount Nema Junction Box 05/20/13

Important Note : Avoid placing new junction boxes in pavement. In the rare case that a new junction box must be place in pavement, use a heavy duty junction box and do everything possible to place the box in the shoulder as opposed to the driven lane. If existing boxes are located in pavement they should be relocated off of pavement. If relocation is not possible the box should be retrofitted with a heavy duty junction box. Type 4, 5 and 6 boxes are heavy duty. For boxes installed off of pavement which are not exposed to traffic, use type 1, 2 or 8. Type 7 and 3 boxes were removed from production and are no longer used. See Standard Plans J-40-10, J-30-30, J-40.30, J-90.10 and J-90.20 for standard J-Box, pull box and cable vault details.

top  

 



Controller Cabinet Details

PDF DGN Ref. No. Description of Detail Date
view dnld 8.20E Controller Cabinet Riser Details 03/30/05
top  

 

Trench Details

PDF DGN Ref. No. Description of Detail Date
view dnld 9.01E Across Roadway Trench Detail - ACP (No Overlay) 03/30/05
view dnld 9.02E Across Roadway Trench Detail - ACP (W/Overlay) 03/30/05
view dnld 9.03E Across Roadway Trench Detail - PCC 03/30/05

* These design details are now located in the Plan Sheet Library or Standard Plans  web pages, please view or download them from these locations.

Archived Detail Library these files are for historical data only do not use.

The files contained on this page are meant to be viewed using WSDOT resource files. Files viewed without WSDOT resource files will be incomplete and will not print or view correctly.

The WSDOT resource file and instructions for downloading can be found at the  CAE Resource Center .