Design: Project Development | GSPs and Amendments | Bridge GSP Division 6
DIVISION6.GR6 STRUCTURES
01.GB6 GENERAL REQUIREMENTS FOR STRUCTURES
BSP0105.GB6 Work Access and Temporary Structures
BSP010501.FB6 (Work Access)
(BSP July 9, 2007)
Use in projects requiring the Contractor to construct
work access to perform structure removal and construction,
including work trestle construction for work within or
above an environmentally sensitive area as required by
resource agency environmental permits and restrictions.
The fill-in specifies the name of the environmentally
sensitive area or waterway.
Include with BSP0105012.GB6.
(1 fill-in)
BSP0105011.FB6 (Waterway Clearance Requirements)
(BSP July 9, 2007)
Use in projects requiring the Contractor to construct
the work access structure to conform to navigation clearance
requirements of the USCG. The first fill-in specifies the
minimum horizontal clearance required for the channel span.
The second fill-in specifies the minimum elevation required
for the bottom of the work access structure superstructure.
Include with BSP010501.FB6 and BSP0105012.GB6.
(2 fill-ins)
BSP0105012.GB6 (Payment)
(BSP July 9, 2007)
Use in projects requiring the Contractor to construct work access
to perform structure removal and construction, including work
trestle construction for work within or above an environmentally
sensitive area as required by resource agency environmental permits
and restrictions. Include with BSP010501.FB6.
BSP010502.FB6 (Temporary Bridge)
(BSP July 9, 2007)
Use in projects requiring construction of a temporary bridge.
The first fill-in specifies the minimum overall length of the
temporary bridge, and can also be used to specify requirements
for number of spans and lengths of specific spans, if necessary.
The second fill-in specifies the minimum usable roadway width
required between barriers or railings. The third fill-in
specifies the minimum vertical clearance dimension to the roadway,
body of water, or surface, specified in the fourth fill-in.
(4 fill-ins)
BSP0109.GB6 Working Drawings
BSP010901.GB6 (Schedule of Working Drawing Submittals)
(BSP July 12, 2000)
Use in projects including construction of multiple
bridges and structures where the cost estimate
subtotal for the structure work exceeds
$20,000,000.00. Also include if the structures in the
project are of unique construction (cable stayed,
floating bridge, segmental concrete, etc.) or include
electrical, hydraulic, or mechanical work.
02.GR6 CONCRETE STRUCTURES
022.GR6 Materials
BSP02205.MB6 (Polymer Concrete)
(BSP June 26, 2000)
Include in projects where polymer concrete is required.
Include with BSP023003.MB6.
BSP02206.MB6 (Polyester Concrete)
(BSP December 2, 2002)
Include in projects where polyester concrete is required.
Include with BSP023006.MB6.
BSP02207.MB6 (Elastomeric Concrete)
(BSP April 7, 2008)
Include in projects where polyester concrete is required.
Include with BSP023007.MB6.
BSP02208.SB6 (Masonry Materials)
(BSP June 26, 2000)
Use in projects where concrete masonry units are
required. The fill-in specifies the surface texture
and color requirements for the various CMU blocks
used, as specified by the Bridge and Structures
Office Architect.
(1 fill-in)
BSP02220.GB6 (Permeon Treatment)
(BSP April 7, 2008)
Use in projects where aesthetic surface aging of
specific concrete surfaces is required.
Include with BSP0231411.MB6, BSP02419A.MB6, and BSP02519A.MB6.
BSP02223.MB6 (Rapid Cure Silicone Sealant)
(BSP June 11, 2003)
Use in projects where rapid cure silicone sealant is
used for expansion joint modification. Include with
BSP02313403.GB6, either BSP02313409.MB6 or
BSP02313410.MB6, either BSP02403.MB6 and BSP02503.MB6,
or BSP02404.FB6 and BSP02504.GB6, and all other
applicable expansion joint modification Bridge Special
Provisions supplementing Sections 6-02.2 and 6-02.3(13).
BSP02231.MB6 (High-Load Elastomeric Bearing Pad Assembly)
(BSP April 7, 2008)
Use in projects with high-load elastomeric bearing
pads. Include with BSP02319A1.GB6, BSP02409.GB6,
and BSP02509.GB6.
BSP02234.MB6 (Cylindrical Bearing)
(BSP April 7, 2008)
Use in projects with cylindrical bearing assemblies.
Include with BSP02319B4.MB6, 02408.FB6, 02508.GB6,
and 0303301.FB6. Include with BSP02241.MB6 when
resin filler is used to fill slotted base plate
holes for bearing anchor bolts.
BSP02236.MB6 (Disc Bearing)
(BSP April 7, 2008)
Use in projects with disc bearing assemblies.
Include with BSP02319B6.MB6, 02408.FB6, 02508.GB6,
and 0303301.FB6. Include with BSP02241.MB6 when
resin filler is used to fill slotted base plate
holes for bearing anchor bolts.
BSP02238.MB6 (Spherical Bearing)
(BSP April 7, 2008)
Use in projects with spherical bearing assemblies.
Include with BSP02319B8.MB6, 02408.FB6, 02508.GB6,
and 0303301.FB6. Include with BSP02241.MB6 when
resin filler is used to fill slotted base plate
holes for bearing anchor bolts.
BSP02241.MB6 (Resin Filler)
(BSP June 26, 2000)
Use in projects where resin filler is required.
BSP02242.MB6 (Compression Molded Pad)
(BSP June 26, 2000)
Use in projects with post-tensioned concrete box
girders where compression molded pads are placed
at the base of the end diaphragm (See Bridge
Design Manual Figure 9.3.1-5).
BSP02247.GB6 (Core Drilled Bridge Deck Drain)
(BSP June 11, 2003)
Use in projects with core drilled bridge deck drains.
Include with BSP02310F7.GB6, and either BSP02417.GB6
and BSP02517.GB6, or BSP02518.FB6.
BSP02260.GB6 (Seismic Retrofit Materials)
(BSP June 26, 2000)
Use in projects with seismic retrofit construction.
BSP022601.MB6 (Concrete, St. Reinf. Bar, and Epoxy Resin)
(BSP June 11, 2003)
Use in projects with seismic retrofit work when
concrete, steel reinforcing bars, and/or epoxy
resin are used as materials. Include with
02324C1.GB6, BSP02406.FB6, 025C1.MB6, and
BSP02506.GB6, and all other applicable seismic
retrofit Bridge Special Provisions supplementing
Sections 6-02.2 and 6-02.3.
BSP022602.GB6 (Steel and PVC Pipe)
(BSP June 26, 2000)
Use in projects with seismic retrofit work when
steel and/or PVC pipe are used as materials.
Include with BSP02406.FB6 and BSP02506.GB6, and
all other applicable seismic retrofit Bridge
Special Provisions supplementing Sections
6-02.2 and 6-02.3.
BSP022603.MB6 (Structural Steel and Steel Fastening Hardware)
(BSP April 7, 2008)
Use in projects with seismic retrofit work when
structural steel and steel fastening hardware are
used as materials. Include with BSP02406.FB6
and BSP02506.GB6, and all applicable other
weismic retrofit Bridge Special Provisions
supplementing Sections 6-02.2 and 6-02.3.
BSP022604.MB6 (High-Strength Steel Rods)
(BSP September 27, 2004)
Use in projects with seismic retrofit work
including installation of longitudinal seismic
restriner assemblies. Include with
BSP02300411.GB6, BSP02406.FB6 and BSP02506.GB6,
and all other applicable seismic retrofit Bridge
Special Provisions supplementing Section 6-02.2
and 6-02.3.
BSP022605.MB6 (Pre-formed Fabric Pads)
(BSP June 26, 2000)
Use in projects with seismic retrofit work when
pre-formed fabric pads are used as materials.
Include with BSP02406.FB6 and BSP02506.GB6, and
all other applicable seismic retrofit Bridge
Special Provisions supplementing Sections 6-02.2
and 6-02.3.
BSP022606.MB6 (Column Jacketing Materials)
(BSP September 26, 2005)
Use in projects with seismic retrofit work when
column jacketing is required. Include with
BSP02300403.GB6, BSP02300404.GB6, BSP02300405.MB6,
BSP02300412.MB6, BSP02407.FB6, BSP02507.GB6,
BSP030325A1.MB6, and 0303301.FB6. Include with BSP02300405A.FB6
when the pre-fabrication field measuring requirements
for specific existing bridge columns are waived.
BSP02295.SB6 (Prestressed Conc. Girders with High
Strength Concrete)
(BSP August 4, 2003)
Use in projects with prestressed concrete girders
requiring final concrete compressive strengths of
58,600 kPa or greater. The first and second fill-ins
identify the bridge(s) using the prestressed concrete
girders with the high strength concrete. The third
fill-in specifies the minimum 56 day compressive
strength required for the mix design, in accordance
with the procedure agreed to by PNW/PCI and WSDOT.
This third fill-in is calculated as 1.05 times the
28 day compressive strength specified in the Girder
Schedule in the Plans. Include with BSP02325B1.MB6,
BSP02325E1.FB6, BSP02325M1.FB6, and BSP02325M2.FB6.
(3 fill-ins)
023.GR6 Construction Requirements
023A.GB6 Must use once, preceding one of the following:
BSP023003.MB6 (Polymer Concrete)
(BSP December 14, 2000)
Use in projects where polymer concrete is
required Include with BSP02205.MB6.
BSP023004.GB6 (Seismic Retrofit)
Must use once, preceding one of the following:
BSP02300401.GB6 (Plans of Existing Bridge)
(BSP June 26, 2000)
Use in projects with seismic retrofit work
when plans of the existing bridge are available.
Include with BSP02406.FB6 and BSP02506.GB6, and
all other applicable seismic retrofit Bridge
Special Provisions supplementing Sections
6-02.2 and 6-02.3.
BSP02300402.GB6 (Seismic Retrofit Demolition Plan)
(BSP June 26, 2000)
Use in seismic retrofit projects where
removal of portions of existing concrete and
steel reinforcing bars, or cleaning and
preparing of existing concrete surfaces is
required. Include with BSP02406.FB6,
BSP02300407.MB6, and BSP02506.GB6, and all
other applicable seismic retrofit Bridge
Special Provisions supplementing Sections
6-02.2 and 6-02.3.
BSP02300403.GB6 (Column Jacket Installation Plan)
(BSP June 11, 2003)
Use in projects with column jacketing of
existing bridges. Include with BSP022606.MB6,
BSP02300404.GB6, BSP02300405.MB6, BSP02300412.MB6,
BSP02407.FB6, BSP02507.GB6, BSP030325A1.MB6, and 0303301.FB6.
Include with BSP02300405A.FB6 when the pre-fabrication
field measuring requirements for specific existing
bridge columns are waived.
BSP02300404.GB6 (Column Jacket Shop Drawings)
(BSP June 26, 2000)
Use in projects with column jacketing of
existing bridges. Include with BSP022606.MB6,
BSP02300403.GB6, BSP02300405.MB6, BSP02300412.MB6,
BSP02407.FB6, BSP02507.GB6, BSP030325A1.MB6, and 0303301.FB6.
Include with BSP02300405A.FB6 when the pre-fabrication
field measuring requirements for specific existing
bridge columns are waived.
BSP02300405.MB6 (Field Measuring Existing Bridge Columns)
(BSP September 26, 2005)
Use in projects where field measuring of
existing bridge columns is required. Include
with BSP022606.MB6, BSP02300403.GB6, BSP02300404.GB6,
BSP02300412.MB6, BSP02407.FB6, BSP02507.GB6,
BSP030325A1.MB6, and 0303301.FB6. Include with BSP02300405A.FB6 when
the pre-fabrication field measuring requirements for
specific existing bridge columns are waived.
BSP02300405A.FB6 (Field Measuring Waiver for Specific Existing
Bridge Columns)
(BSP June 11, 2003)
Use in projects where the requirements of pre-
fabrication field measuring of specific existing bridge
columns is waived. The fill-in specifies the bridge(s)
and pier(s) where the column receiving the waiver is
located. Include with BSP022606.GB6, BSP02300403.GB6,
BSP02300404.GB6, BSP02300405.MB6, BSP02300412.GB6,
BSP02407.FB6, BSP02507.GB6, BSP030325A1.GB6, and 0303301.FB6.
(1 fill-in)
BSP02300406.FB6 (Field Measuring for Seismic Retrofit Components)
(BSP June 26, 2000)
Use in projects where field measuring of
existing bridge members is required for seismic
retrofit components. The first fill-in specifies
the bridge(s) where the field measuring work is
required. The second fill-in specifies the members
or components to be measured. Include with
BSP02406.FB6, and BSP02506.GB6, and all other
applicable seismic retrofit Bridge Special
Provisions supplementing Sections 6-02.2 and 6-02.3.
(2 fill-ins)
BSP02300407.MB6 (Removing Portions of Existing Concrete)
(BSP August 1, 2005)
Use in seismic retrofit projects where removal of
portions of existing concrete and steel reinforcing
bars, or cleaning and preparing of existing concrete
surfaces is required. Include with BSP02300402.GB6,
BSP02406.FB6, and BSP02506.GB6, and all other
applicable seismic retrofit Bridge Special
Provisions supplementing Sections 6-02.2 and 6-02.3.
BSP02300408.MB6 (Removing Portions of Existing Concrete
Without Replacement)
(BSP August 1, 2005)
Use in seismic retrofit projects where removal
of portions of existing concrete without
replacement is required. Include with BSP02300402.GB6,
BSP02300407.MB6, BSP02406.FB6, and BSP02506.GB6, and
all other applicable seismic retrofit Bridge Special
Provisions supplementing Sections 6-02.2 and 6-02.3.
BSP02300409.GB6 (Drilling Holes and Setting Steel Reinf. Bars,
and Placing Concrete)
(BSP June 26, 2000)
Use in seismic retrofit projects requiring the
construction of catcher blocks, girder stops, and
other concrete appendages. Include with
BSP022601.MB6, BSP02300402.GB6, BSP02300407.MB6,
BSP02324C1.GB6, BSP02406.FB6, 025C1.MB6, and
BSP02506.GB6, and all other applicable seismic
retrofit Bridge Special Provisions supplementing
Sections 6-02.2 and 6-02.3.
BSP02300410.GB6 (Installing and Tensioning High-Strength
Steel Bar Reinforcement)
(BSP June 11, 2003)
Use in seismic retrofit projects requiring the
installation, stressing, and grouting of high-
strength steel bar reinforcement. Include with
BSP02406.FB6, and BSP02506.GB6, and all other
applicable seismic retrofit Bridge Special
Provisions supplementing Sections 6-02.2 and 6-02.3.
BSP02300411.GB6 (Longitudinal Seismic Restrainers)
(BSP June 11, 2003)
Use in seismic retrofit projects requiring the
installation of longitudinal seismic restrainer
assemblies. Include with BSP022602.GB6,
BSP022603.MB6, BSP022604.MB6, BSP022605.MB6,
02318.MB6, either BSP02405.GB6 and
BSP02505.GB6, or BSP02406.FB6 and BSP02506.GB6, and
all other applicable seismic retrofit Bridge
Special Provisionssupplementing Sections 6-02.2
and 6-02.3.
BSP02300412.MB6 (Column Jacketing)
(BSP August 4, 2008)
Use in projects with column jacketing of
existing bridges. Include with BSP022606.MB6,
BSP02300403.GB6, BSP02300404.GB6, BSP02300405.MB6,
BSP02407.FB6, BSP02507.GB6, BSP030325A1.MB6, and 0303301.FB6.
Include with BSP02300405A.FB6 when the pre-fabrication
field measuring requirements for specific existing
bridge columns are waived.
BSP023006.MB6 (Polyester Concrete)
(BSP May 2, 2005)
Use in projects where polyester concrete is required.
Include with BSP02206.MB6.
BSP023007.MB6 (Elastomeric Concrete)
(BSP January 29, 2007)
Use in projects where elastomeric concrete is required.
Include with BSP02207.MB6.
BSP02302.GB6 Proportioning Materials
BSP023021.GB6 Use preceding the following:
BSP0230211.MB6 (Expansion Joint Header Concrete)
(BSP July 9, 2007)
Use in projects with expansion joint
modification shere the headers for the
modified joints are made of a high early
strength concrete mix. Include with
02203.GB6, 02324C1.GB6, 025C1.GB6,
BSP02313408.GB6, either BSP02403.GB6
and BSP02503.GB6, or BSP02404.FB6
and BSP02504.GB6, and all other applicable
expansion joint modification Bridge Special
Provisions supplementing Sections 6-02.2
and 6-02.3(13).
02310.GB6 Roadway Slabs
02310F.GB6 Bridge Approach Slab Orientation and Anchors
BSP02310F7.GB6 (Core Drilled Bridge Deck Drain)
(BSP June 11, 2003)
Use in projects with core drilled bridge deck
drains. Include with BSP02247.GB6, and either
02417.GB6 and 02517.GB6, or 02518.FB6.
02313.GB6 Expansion Joints
BSP023134.GB6 Expansion Joint Modification
BSP02313401.GB6 (Plans of Existing Expansion Joint)
(BSP June 26, 2000)
Use in projects with expansion joint
modification when plans of the existing
joint are available. Include with either
BSP02403.MB6 and BSP02503.MB6, or
BSP02404.FB6 and BSP02504.GB6, and all
applicable expansion joint modification
Bridge Special Provisions supplementing
Sections 6-02.2 and 6-02.3(13).
BSP02313402.GB6 (Expansion Joint Demolition Plan)
(BSP June 26, 2000)
Use in projects where removal of portions of
the existing bridge expansion joint
assembly, and/or adjacent concrete and
steel reinforcing bars, is required.
Include with BSP02313405.SB6, either
BSP02403.MB6 and BSP02503.MB6, or
BSP02404.FB6 and BSP02504.GB6, and all
other applicable expansion joint modification
Bridge Special Provisions supplementing
Sections 6-02.2 and 6-02.3(13).
BSP02313403.GB6 (Joint Preparation and Installation
Procedure)
(BSP June 26, 2000)
Use in projects where rapid cure silicone
sealant is used for expansion joint
modification. Include with BSP02223.MB6,
BSP02313409.MB6 or BSP02313410.MB6, either
BSP02403.MB6 and BSP02503.MB6, or
BSP02404.FB6 and BSP02504.GB6, and all
other applicable expansion joint modification
Bridge Special Provisions supplementing
Sections 6-02.2 and 6-02.3(13).
BSP02313404.FB6 (Field Measuring Existing Expansion Joint)
(BSP June 26, 2000)
Use in projects where field measuring of the
existing expansion joint is required. The fill-
in specifies the bridge(s) included in the field
measuring requirement. Include with either
BSP02403.MB6 and BSP02503.MB6, or BSP02404.FB6
and BSP02504.GB6, and all other applicable
expansion joint modification Bridge Special
Provisions supplementing Sections 6-02.2 and
6-02.3(13).
(1 fill-in)
BSP02313405.SB6 (Removing Portions of Existing Bridge
Expansion Joints)
(BSP January 29, 2007)
Use in projects where removal of portions of
the existing bridge expansion joint assembly,
and/or adjacent concrete and steel reinforcing
bars, is required. The fill-in specified the
bridge(s) where the expansion joint removal
work is required. Include with BSP02313402.GB6,
either BSP02403.MB6 and BSP02503.MB6, or
BSP02404.FB6 and BSP02504.GB6, and all other
applicable expansion joint modification Bridge
Special Provisions supplementing Sections
6-02.2 and 6-02.3(13).
(1 fill-in)
BSP02313406.GB6 (Drilling Holes and Setting St. Reinf. Bars)
(BSP June 26, 2000)
Use in projects with expansion joint
modification where drilling holes and setting
steel reinforcing bar dowels are required.
Include with 02203.GB6, 02324C1.GB6, 025C1.MB6,
either BSP02403.MB6 and BSP02503.MB6, or
BSP02404.FB6 and BSP02504.GB6, and all other
applicable expansion joint modification Bridge
Special Provisions supplementing Sections
6-02.2 and 6-02.3(13).
BSP02313407.GB6 (Placing Polymer Concrete Headers)
(BSP June 26, 2000)
Use in projects when the headers for
modified bridge expansion joints are made
of polymer concrete. Include with BSP02205.MB6,
BSP023003.MB6, either BSP02403.MB6 and BSP02503.MB6,
or BSP02404.FB6 and BSP02504.GB6, and all other
applicable expansion joint modification Bridge
Special Provisions supplementing Sections
6-02.2 and 6-02.3(13).
BSP02313407A.GB6 (Placing Polyester Concrete or Elastomeric Concrete Headers)
(BSP January 29, 2007)
Use in projects when the headers for
modified bridge expansion joints are made
of either polyester concrete or elastomeric concrete.
Include with either BSP02206.MB6,and BSP023006.MB6,or
BSP02207.MB6 and BSP023007.MB6,
either BSP02403.MB6 and BSP02503.MB6,
or BSP02404.FB6 and BSP02504.GB6, and all other
applicable expansion joint modification Bridge
Special Provisions supplementing Sections
6-02.2 and 6-02.3(13).
BSP02313408.GB6 (Placing Concrete Headers)
(BSP June 26, 2000)
Use in projects where the headers for
modified bridge expansion joints are made
of concrete. Include with 02203.GB6, 02324C1.GB6,
025C1.MB6, BSP02313406.GB6, either BSP02403.MB6
and BSP02503.MB6, or BSP02404.FB6 and BSP02504.GB6,
and all other applicable expansion joint
modification Bridge Special Provisions supplementing
Sections 6-02.2 and 6-02.3(13).
BSP02313409.MB6 (Placing Expansion Joint Sealant)
(BSP January 29, 2007)
Use in projects where rapid cure silicone
sealant is used for modified bridge expansion
joints with concrete or polymer concrete or polyester
concrete or elastomeric concrete headers.
Include with BSP02223.MB6,
BSP02313403.GB6, either BSP02403.MB6 and BSP02503.MB6,
or BSP02404.FB6 and BSP02504.GB6, and all other
applicable expansion joint modification Bridge
Special Provisions supplementing Sections 6-02.2
and 6-02.3(13).
BSP02313410.MB6 (Placing Expansion Joint Sealant)
(BSP Jaunary 29, 2007)
Use in projects where rapid cure silicone
sealant is used for modified bridge expansion
joints with modified concrete overlay headers.
To be used only for bridges with low ADT, and
only with the approval of the Bridge and
Structures Office Bearing and Expansion Joint
Specialist. Include with BSP02223.MB6,
BSP02313403.GB6, either BSP02403.MB6 and
BSP02503.MB6, or BSP02404.FB6 and BSP02504.GB6,
and all other applicable expansion joint
modification Bridge Special Provisions
supplementing Sections 6-02.2 and 6-02.3(13).
02314.GB6 Finishing Concrete Surfaces
BSP0231411.MB6 (Permeon Treatment)
(BSP April 7, 2008)
Use in projects where aesthetic surface aging
of specific concrete surfaces is required.
Include with BSP02220.GB6, BSP02419A.MB6, and BSP02519A.MB6.
02319.GB6 Bridge Bearings
BSP02319A.GB6 Bridge Bearing Pads
BSP02319A1.GB6 (High-Load Elastomeric Bearing Pad
Assembly)
(BSP June 26, 2000)
Use in projects with high-load elastomeric
bearing pad assemblies. Include with
BSP02231.MB6, BSP02409.GB6, and BSP02509.GB6.
BSP02319B.GB6 Bridge Bearing Assemblies
BSP02319B2.GB6 (Transverse Stop Bearing)
(BSP September 27, 2004)
Use in projects with fabric pad transverse
stop bearing assemblies. Include with
02230.MB6, 02319B1.MB6, BSP02408A.GB6,
BSP02508A.GB6, and 0303301.FB6.
BSP02319B4.MB6 (Cylindrical Bearing)
(BSP April 7, 2008)
Use in projects with cylindrical bearing assemblies.
Include with BSP02234.MB6, 02408.FB6, 02508.GB6,
and 0303301.FB6. Include with BSP02241.MB6 when
resin filler is used to fill slotted base plate
holes for bearing anchor bolts.
BSP02319B6.MB6 (Disc Bearing)
(BSP April 7, 2008)
Use in projects with disc bearing assemblies.
Include with BSP02236.MB6, 02408.FB6, 02508.GB6,
and 0303301.FB6. Include with BSP02241.MB6 when
resin filler is used to fill slotted base plate
holes for bearing anchor bolts.
BSP02319B8.MB6 (Spherical Bearing)
(BSP April 7, 2008)
Use in projects with spherical bearing assemblies.
Include with BSP02238.MB6, 02408.FB6, 02508.GB6,
and 0303301.FB6. Include with BSP02241.MB6 when
resin filler is used to fill slotted base plate
holes for bearing anchor bolts.
02324.GB6 Reinforcement
BSP02324E.GB6 Welding Reinforcing Steel
BSP02324E1.MB6 (Welding Epoxy-coated Steel Reinforcing
Bars)
(BSP June 26, 2000)
Use in projects with welded splices of
epoxy-coated steel reinforcing bars.
BSP02325.GB6 Prestressed Concrete Girders
BSP02325B.GB6 Casting
BSP02325B1.MB6 (Contractor-Provided mix design for Prestressed
Conc. Girders using High Strength Concrete)
(BSP August 4, 2003)
Use in projects with prestressed concrete
girders requiring final concrete compressive
strengths of 58,600 kPa or greater.
Include with BSP02295.SB6, BSP 02325E1.FB6, BSP02325M1.FB6,
and BSP02325M2.FB6.
BSP02325E.GB6 Contractors Control Strength
BSP02325E1.FB6 (Prestressed Conc. Girders using High Strength
Concrete)
(BSP August 4, 2003)
Use in projects with prestressed concrete
girders requiring final concrete compressive
strengths of 58,600 kPa or greater. The
fill-in identifies the bridge(s) using the
prestressed concrete girders with the high
strength concrete. Include with BSP02295.SB6,
BSP02325B1.MB6, BSP02325M1.FB6, and BSP02325M2.FB6.
(1 fill-in)
BSP02325M.GB6 Shipping
BSP02325M1.FB6 (Approval of Prestressed Conc. Girders with High
Strength Concrete for Shipment)
(BSP August 4, 2003)
Use in projects with prestressed concrete girders
requiring final concrete compressive strengths of
58,600 kPa or greater. The fill-in identifies the
bridge(s) with the prestressed concrete girders
using the high strength concrete. Include with
BSP02295.SB6, BSP02325B1.GB6, BSP02325E1.FB6, and
BSP02325M2.FB6.
(1 fill-in)
BSP02325M2.FB6 (Longer Fabrication Time for Prestressed Conc.
Girders with min. 8,500 psi Final Conc. Strength)
(BSP August 4, 2003)
Use in projects with prestressed concrete girders
requiring final concrete compressive strengths of
58,600 kPa or greater. The fill-in identifies the
bridge(s) using the prestressed concrete girders
requiring the final concrete compressive strengths
of 58,600 kPa or greater. Include with
BSP02295.SB6, BSP02325B1.GB6, BSP02325E1.FB6, and
BSP02325M1.FB6.
(1 fill-in)
024.GB6 Measurement
BSP02403.MB6 (Expansion Joint Modification)
(BSP June 26, 2000)
Use in projects where expansion joint modification is
a stand-alone bid item. Include with BSP02503.MB6
and all applicable expansion joint modification
Bridge Special Provisions supplementing Sections
6-02.2 and 6-02.3(13).
BSP02404.FB6 (Expansion Joint Modification)
(BSP June 26, 2000)
Use in projects with lump sum item for expansion
joint modification. The fill-in specifies the
approximate quantities included. Include with
BSP02504.GB6 and all applicable expansion joint
modification Bridge Special Provisions supplementing
Sections 6-02.2 and 6-02.3(13).
(1 fill-in)
BSP02405.GB6 (Longitudinal Seismic Restrainer)
(BSP June 26, 2000)
Use in projects where longitudinal seismic restrainer
is a stand-alone bid item. Include with
BSP022602.GB6, BSP022603.MB6, BSP022604.MB6,
BSP022605.MB6, BSP02300411.GB6, 02318.MB6, BSP02505.GB6,
and all applicable seismic retrofit Bridge Special
Provisions supplementing Sections 6-02.2 and 6-02.3.
BSP02406.FB6 (Seismic Retrofit)
(BSP June 26, 2000)
Use in projects with lump sum item for seismic
retrofit. The fill-in specifies the
approximate quantities included. Include with
BSP02506.GB6 and all applicable seismic retrofit
Bridge Special Provisions supplementing
Sections 6-02.2 and 6-02.3.
(1 fill-in)
BSP02407.FB6 (Column Jacketing)
(BSP June 26, 2000)
Use in projects with lump sum item for column
jacketing. The fill-in specifies the
approximate quantities included. Include with
BSP022606.MB6, BSP02300403.GB6, BSP02300404.GB6,
BSP023005.GB6, BSP02300412.MB6, BSP02507.GB6
BSP030325A1.MB6, and 0303301.FB6. Include with BSP02300405A.FB6 when
the pre-fabrication field measuring requirements for
specific existing bridge columns are waived.
(1 fill-in)
BSP02408A.GB6 (Transverse Stop Bearing)
(BSP September 27, 2004)
Use in projects with fabric pad transverse stop bearing assemblies.
Include with 02230.MB6, 02319B1.MB6, BSP02319B2.GB6, BSP02508A.GB6,
and 0303301.FB6.
BSP02409.GB6 (High-Load Elastomeric Bearing Pad)
(BSP June 26, 2000)
Use in projects with high-load elastomeric bearing
pad assemblies. Include with BSP02231.MB6,
BSP02319A1.GB6, and BSP02509.GB6.
BSP02417.GB6 (Core Drilled Bridge Deck Drain)
(BSP June 26, 2000)
Use in projects where core drilled bridge deck
drain is a stand-alone bid item. Include with
BSP02247.GB6, BSP023107.GB6, and BSP02517.GB6.
BSP02419.MB6 (Prestressed Concrete Girder)
(BSP December 5, 2005)
Use in all projects with prestressed concrete
girders, including all WSDOT standard series
girders and all PCPS members. Include with
BSP02519.MB6.
BSP02419A.MB6 (Permeon Treatment)
(BSP April 7, 2008)
Use in projects where aesthetic surface aging
of specific concrete surfaces is required.
Include with BSP02220.GB6, BSP0231411.MB6, and BSP02519A.MB6.
025.GR6 Payment
025C.GB6 Must use once, preceding the following:
BSP025C2.GB6 (Epoxy-Coated St. Reinf. Bar for Bridge)
(BSP June 26, 2000)
Use in projects with small amounts of
epoxy-coated steel reinforcing
bar in bridge substructure which is included
in the quantity for "St. Reinf. Bar for
Bridge" in lieu of a separate stand-alone
bid item.
025D.GB6 Must use once, preceding one of the following:
BSP02503.MB6 (Expansion Joint Modification)
(BSP June 26, 2000)
Use in projects where expansion joint
modification is a unit bid item. Include
with BSP02403.MB6 and all applicable
expansion joint modification Bridge
Special Provisions supplementing Sections
6-02.2 and 6-02.3(13).
BSP02504.GB6 (Expansion Joint Modification)
(BSP June 26, 2000)
Use in projects where expansion joint
modification is a lump sum item. Include
with BSP02404.FB6 and all applicable
expansion joint modification Bridge
Special Provisions supplementing Sections
6-02.2 and 6-02.3(13).
BSP02505.GB6 (Longitudinal Seismic Restrainer)
(BSP June 26, 2000)
Use in projects where longitudinal seismic
restrainer is a stand-alone item. Include
with BSP022602.GB6, BSP022603.MB6,
BSP022604.MB6, BSP022605.MB6,
BSP02300411.GB6, 02318.MB6, BSP02405.GB6,
and all applicable seismic retrofit
Bridge Special Provisions supplementing
Sections 6-02.2 and 6-02.3.
BSP02506.GB6 (Seismic Retrofit)
(BSP June 26, 2000)
Use in projects with seismic retrofit of
bridges. Include with BSP02406.FB6 and
all applicable seismic retrofit Bridge
Special Provisions supplementing Sections
6-02.2 and 6-02.3.
BSP02507.GB6 (Column Jacketing)
(BSP June 26, 2000)
Use in projects with column jacketing of
bridges. Include with BSP022606.MB6,
BSP02300403.GB6, BSP02300404.GB6,
BSP02300405.MB6, BSP02300412.MB6,
BSP02407.FB6, BSP030325A1.MB6, and 0303301.FB6.
Include with BSP02300405A.FB6 when
the pre-fabrication field measuring requirements for
specific existing bridge columns are waived.
BSP02507A.GB6 (Transverse Stop Bearing)
(BSP September 27, 2004)
Use in projects with fabric pad transverse
stop bearing assemblies. Include with
02230.MB6, 02319B1.MB6, BSP02319B2.GB6,
BSP02408A.GB6, and 0303301.FB6.
BSP02509.GB6 (High-Load Elastomeric Bearing Pad)
(BSP June 26, 2000)
Use in projects with high-load elastomeric
bearing pad assemblies. Include with
BSP02231.MB6, BSP02319A1.GB6, and
BSP02409.GB6.
BSP02517.GB6 (Core Drilled Bridge Deck Drain)
(BSP June 26, 2000)
Use in projects where core drilled bridge
deck drain is a stand-alone bid item. Include
with BSP02247.GB6, BSP023107.GB6, and
BSP02417.GB6.
BSP02518.FB6 (Core Drilled Bridge Deck Drain)
(BSP June 26, 2000)
Use in projects where core drilled bridge
deck drain is a included in a separate bid
item. The fill-in specifies the bid item
including this work. Include with
BSP02247.GB6 and BSP023107.GB6.
(1 fill-in)
BSP02519.MB6 (Prestressed Concrete Girder)
(BSP November 5, 2006)
Use in all projects with prestressed concrete
girders, including all WSDOT standard series
girders and all PCPS members. Include with
BSP02419.MB6.
BSP02519A.MB6 (Permeon Treatment)
(BSP April 7, 2008)
Use in projects where aesthetic surface aging of
specific concrete surfaces is required.
Include with BSP02220.GB6, BSP0231411.MB6, and BSP02419A.MB6.
03.GB6 STEEL STRUCTURES
BSP0302.GB6 Materials
BSP030201.MB6 (HPS Steel)
(BSP June 11, 2003)
Use in projects where High Strength Steel
conforming to ASTM A 709M Grade HPS 70W
is used. Include with BSP0303A1.FB6,
BSP0303111.MB6, and BSP03032511.MB6
BSP030208.MB6 (Pin Bearing)
(BSP April 7, 2008)
Use in projects with pin bearing assemblies.
Include with BSP0303A8.MB6, 0303301.FB6,
BSP0303371.GB6, BSP03048.GB6, and BSP0305B8.GB6.
Include with BSP02241.MB6 when resin filler is
used to fill slotted base plate holes for
bearing anchor bolts.
0303.GB6 Construction Requirements
BSP0303A.GB6 Must use once, preceding one of the following:
BSP0303A1.FB6 (Fabricator Certification for HPS Steel)
(BSP January 7, 2002)
Use in projects where High Strength Steel
conforming to ASTM A 709M Grade HPS 70W
is used. The fill-in specifies the name
of bridge number of the bridge(s) using
the high performance steel. Include with
BSP030201.MB6, BSP0303111.MB6, and
BSP03032511.MB6.
(1 fill-in)
BSP0303A8.MB6 (Pin Bearing)
(BSP April 7, 2008)
Use in projects with pin bearing assemblies.
Include with BSP030208.MB6, 0303301.FB6,
BSP0303371.GB6, BSP03048.GB6, and BSP0305B8.GB6.
Include with BSP02241.MB6 when resin filler is
used to fill slotted base plate holes for
bearing anchor bolts.
BSP030307.GB6 Shop Plans
BSP030307A.GB6 Erection Methods
BSP030307A1.GB6 (Erection by Girder Launching)
(BSP July 12, 2000)
Use in projects where girder launching may
be used as an erection method.
BSP030307A2.GB6 (Hand-held Drilling and Reaming)
(BSP July 12, 2000)
Use in projects where drilling and reaming
operations with hand-held devices is
permissible, with the approval of the
Bridge and Structures Office Steel
Specialist. Include with BSP030327B1.SB6.
BSP030311.GB6 Workmanship and Finish
BSP0303111.MB6 (Fabrication Specifications for HPS Steel)
(BSP January 7, 2002)
Use in projects where High Strength Steel
conforming to ASTM A 709M Grade HPS 70W
is used. Include with
BSP030201.MB6, BSP0303A1.FB6, and
BSP03032511.MB6.
BSP030318.GB6 Built Members
BSP0303181.GB6 (Heat Curving)
(BSP July 12, 2000)
Use in projects where heat curving of the
flanges and webs of built-up steel members
is permissible, with the approval of the
Bridge and Structures Office Steel Specialist.
BSP030325.GB6 Welding and Repair Welding
BSP0303251.GB6 Use preceding the following two BSP's only
BSP03032511.GB6 (Welding Requirements for ASTM A 709
Grade HPS 70W Steel)
(BSP September 25, 2002)
Use in projects where High Strength Steel
conforming to ASTM A 709M Grade HPS 70W
is used. Include with
BSP030201.MB6, BSP0303A1.FB6, and
BSP030325111.MB6.
BSP03032512.MB6 (Narrow Gap Improved-Electrosiag Welding
(NGI-ESW) Procedure)
(BSP May 17, 2004)
Use in projects with steel plate girder
bridges primarily with Grades 345 and 345W
steel and four or more girders per span,
with the concurrence of the Bridge and Structures
Office Steel Specialist. Accompanying details
are required in the Plans for NGI-ESW consumable
guide configurations, and test joint configurations
for WPS qualification and charpy v-notch test specimens.
BSP030325A.GB6 Welding Inspection
BSP030325A1.MB6 (Column Jacket Welding Inspection
Requirement)
(BSP July 12, 2000)
Use in projects with column jacketing of
existing bridges. Include with BSP022606.MB6,
BSP02300403.GB6, BSP02300404.GB6,
BSP02300405.MB6, BSP02300412.MB6,
BSP02407.FB6, BSP02507.GB6, and 0303301.FB6.
Include with BSP02300405A.FB6 when
the pre-fabrication field measuring
requirements for specific existing
bridge columns are waived.
BSP030327.GB6 High Strength Bolt Holes
BSP030327B.GB6 Reamed and Drilled Holes
BSP030327B1.SB6 (Hand-held Drilling and Reaming)
(BSP July 12, 2000)
Use in projects where drilling and reaming
operations with hand-held devices is
permissible, with the approval of the Bridge
and Structures Office Steel Specialist. The
first fill-in specifies the members and items
being drilled and reamed, and the second
fill-in specifies the bridge(s) where the work
is being done. Include with BSP030307A2.GB6.
(2 fill-ins)
030330.GB6 Painting
BSP0303302.FB6 (Painting Galvanized Seismic Retrofit
Components)
(BSP July 12, 2000)
Use in seismic retrofit projects where galvanized
steel components are attached to painted members
of existing steel bridges to cover paint color
requirements. The first fill-in specifies the
galvanized components to be painted. The second
fill-in specifies the Federal Standard 595B Color
Number, or the color name if no numbers.
(2 fill-ins)
030337.GB6 Setting Steel Bridge Bearings
BSP0303371.GB6 (Pin Bearing)
(BSP September 27, 2004)
Use in projects with pin bearing assemblies.
Include with BSP030208.MB6, BSP0303A8.MB6,
0303301.FB6, BSP03048.GB6, and BSP0305B8.GB6.
Include with BSP02241.MB6 when resin filler
is used to fill slotted base plate holes for
bearing anchor bolts.
0304.GB6 Measurement
BSP03048.GB6 (Pin Bearing)
(September 27, 2004)
Use in projects with pin bearing assemblies.
Include with BSP030208.MB6, BSP0303A8.MB6,
0303301.FB6, BSP0303371.GB6, and BSP0305B8.GB6.
Include with BSP02241.MB6 when resin filler is
used to fill slotted base plate holes for
bearing anchor bolts.
0305.GB6 Payment
BSP0305B.GB6 Must use once, preceding one of the following:
BSP0305B8.GB6 (Pin Bearing)
(BSP September 27, 2004)
Use in projects with pin bearing assemblies.
Include with BSP030208.MB6, BSP0303A8.MB6,
0303301.FB6, BSP0303371.GB6, and BSP03048.GB6.
Include with BSP02241.MB6 when resin filler
is used to fill slotted base plate holes for
bearing anchor bolts.
05.GB6 PILING
0503.GB6 Construction Requirements
050311D.GB6 Achieving Minimum Tip Elevation and
BSP050311D5.FB6 (Overdriving)
(August 22, 2005)
Include in projects where overdriving of piles
is anticipated in order to reach the minimum
tip elevation, as recommended by the Materials
Laboratory Geotechnical Branch. The first
fill-in specifies the general location(s)
(bridge and pier) of the anticipated pile
overdriving. The second fill-in specifies
the approximate magnitude of expected overdriving.
(2 fill-ins)
06.GB6 BRIDGE RAILINGS
0602.GB6 Materials
BSP06023.GB6 (Tamper Proof Nuts for Steel Bridge Railing
Type BP)
(BSP February 20, 2002)
Include in projects where steel bridge railing Type BP
is used.
BSP06024.SB6 (Bridge Railing Type Snow Fence and Bridge Railing
Type Wire Fabric Fence)
(BSP April 7, 2008)
Use in projects with either Bridge Railing Type Snow
Fence or Bridge Railing Type Wire Fabric Fence or both.
The fill-in specifies the Federal Standard 595B Color Number,
or the color name if no number. Include with BSP0603024.FB6.
(1 fill-in)
07.GB6 PAINTING
BSP0702.GB6 Materials
BSP070201.MB6 (Powder Coating Materials)
(BSP May 15, 2006)
Use in projects where the HQ Construction Office
has approved the use of powder coating as an
alternative to the two-coat conventional paint
coating over galvanized steel surfaces. Include
with BSP07030401.SB6.
BSP0703.GB6 Construction Requirements
BSP070304.GB6 Painting Galvanized Surfaces
BSP07030401.SB6 (Powder Coating
(BSP May 15, 2006)
Use in projects where the HQ Construction Office
has approved the use of powder coating as an
alternative to the two-coat conventional paint
coating over galvanized steel surfaces. The
fill-in specifies the items, such as Cantilever
Sign Structure Nos. __, Sign Bridge Nos. __, or
Bridge Railing Type __, may be coated with the
powder coating system after galvanizing. Include
with BSP070201.MB6.
(1 fill-in)
09.GB6 MODIFIED CONCRETE OVERLAYS
BSP0902.GB6 Materials
BSP090201.GB6 (Special Materials For Rapid Set Latex Modified
Concrete)
(BSP September 9, 2002)
Use in projects where rapid set latex modified
concrete is required. Include with either 09030501.GB6 or 09030502.GB6.
Include with BSP090301H1.MB6, BSP09030304.MB6,
BSP090306C1.GB6, BSP09030801.GB6, BSP09030802.MB6,
BSP09030901.GB6, BSP09031101.MB6, BSP09031201.GB6,
BSP09031301.MB6, BSP090401.GB6, BSP0905A1.MB6, and
BSP0905B1.GB6.
BSP090202.MB6 (Materials For Polyester Concrete)
(BSP December 2, 2002)
Use in projects where polyester concrete
is required. Include with BSP090301011.GB6,
BSP09030201.MB6, BSP09030305.MB6,
BSP09030306.GB6, BSP09030401.GB6, BSP09030504.GB6,
BSP09030505.MB6, BSP09030506.GB6, BSP090306C2.MB6,
BSP09030803.GB6, BSP09030804.MB6, BSP09030902.MB6,
BSP09031001.MB6, BSP09031102.MB6, BSP09031202.MB6,
BSP09031302.MB6, BSP09031401.MB6, BSP090402.MB6,
BSP0905B2.GB6, BSP0905B3.GB6, and BSP0905B4.MB6.
0903.GB6 Construction Requirements
BSP090301.GB6 Equipment
BSP09030101.GB6 Must use once, preceding the following:
BSP090301011.GB6 (Mobile Mixer for Polyester Concrete)
(BSP December 2, 2002)
Use in projects where polyester concrete
is required. Include with BSP090202.MB6,
BSP09030201.MB6, BSP09030305.MB6,
BSP09030306.GB6, BSP09030401.GB6, BSP09030504.GB6,
BSP09030505.MB6, BSP09030506.GB6, BSP090306C2.MB6,
BSP09030803.GB6, BSP09030804.MB6, BSP09030902.MB6,
BSP09031001.MB6, BSP09031102.MB6, BSP09031202.MB6,
BSP09031302.MB6, BSP09031401.MB6, BSP090402.MB6,
BSP0905B2.GB6, BSP0905B3.GB6, and BSP0905B4.MB6.
BSP090301H.GB6 Mobile Mixer for Latex Modified Concrete
BSP090301H1.MB6 (Mobile Mixer Capacity for Rapid Set Latex
Modified Concrete)
(BSP September 9, 2002)
Use in projects where rapid set latex modified
concrete is required. Include with either 09030501.GB6 or 09030502.GB6.
Include with BSP090201.GB6, BSP09030304.MB6,
BSP090306C1.GB6, BSP09030801.GB6, BSP09030802.MB6,
BSP09030901.GB6, BSP09031101.MB6, BSP09031201.GB6,
BSP09031301.MB6, BSP090401.GB6, BSP0905A1.MB6, and
BSP0905B1.GB6.
BSP090302.GB6 Submittals
BSP09030201.MB6 (Submittals for Polyester Concrete)
(BSP April 7, 2008)
Use in projects where polyester concrete is
required. Include with BSP090202.MB6, BSP090301011.GB6,
BSP09030305.MB6, BSP09030306.GB6,
BSP09030401.GB6, BSP09030504.GB6, BSP09030505.MB6,
BSP09030506.GB6, BSP090306C2.MB6, BSP09030803.GB6,
BSP09030804.MB6, BSP09030902.MB6, BSP09031001.MB6,
BSP09031102.MB6, BSP09031202.MB6, BSP09031302.MB6,
BSP09031401.MB6, BSP090402.MB6, BSP0905B2.GB6,
BSP0905B3.GB6, and BSP0905B4.MB6.
090303.GB6 Concrete Overlay Mixes
BSP09030304.MB6 (Rapid Set Latex Modified Concrete)
(BSP September 9, 2002)
Use in projects where rapid set latex modified concrete
is required. Include with either
09030501.GB6 or 09030502.GB6. Include with BSP090201.GB6,
BSP090301H1.MB6, BSP090306C1.GB6, BSP09030801.GB6,
BSP09030802.MB6, BSP09030901.GB6, BSP09031101.MB6,
BSP09031201.GB6, BSP09031301.MB6, BSP090401.GB6,
BSP0905A1.MB6, and BSP0905B1.GB6.
BSP09030305.MB6 (Polyester Concrete)
(BSP December 2, 2002)
Use in projects where polyester concrete is
required. Include with BSP090202.MB6, BSP090301011.GB6,
BSP09030201.MB6, BSP09030306.GB6,
BSP09030401.GB6, BSP09030504.GB6, BSP09030505.MB6,
BSP09030506.GB6, BSP090306C2.MB6, BSP09030803.GB6,
BSP09030804.MB6, BSP09030902.MB6, BSP09031001.MB6,
BSP09031102.MB6, BSP09031202.MB6, BSP09031302.MB6,
BSP09031401.MB6, BSP090402.MB6, BSP0905B2.GB6,
BSP0905B3.GB6, and BSP0905B4.MB6.
BSP09030306.GB6 (Deck Repair Concrete for Polyester
Concrete Overlays)
(BSP December 2, 2002)
Use in projects where polyester concrete is
required. Include with BSP090202.MB6, BSP090301011.GB6,
BSP09030201.MB6, BSP09030305.MB6,
BSP09030401.GB6, BSP09030504.GB6, BSP09030505.MB6,
BSP09030506.GB6, BSP090306C2.MB6, BSP09030803.GB6,
BSP09030804.MB6, BSP09030902.MB6, BSP09031001.MB6,
BSP09031102.MB6, BSP09031202.MB6, BSP09031302.MB6,
BSP09031401.MB6, BSP090402.MB6, BSP0905B2.GB6,
BSP0905B3.GB6, and BSP0905B4.MB6.
BSP090304.GB6 Storing and Handling
BSP09030401.GB6 (Storing and Handling of Polyester
Concrete Materials)
(BSP December 2, 2002)
Use in projects where polyester concrete is
required. Include with BSP090202.MB6, BSP090301011.GB6,
BSP09030201.MB6, BSP09030305.MB6,
BSP09030306.GB6, BSP09030504.GB6, BSP09030505.MB6,
BSP09030506.GB6, BSP090306C2.MB6, BSP09030803.GB6,
BSP09030804.MB6, BSP09030902.MB6, BSP09031001.MB6,
BSP09031102.MB6, BSP09031202.MB6, BSP09031302.MB6,
BSP09031401.MB6, BSP090402.MB6, BSP0905B2.GB6,
BSP0905B3.GB6, and BSP0905B4.MB6.
090305.GB6 Scarifying Concrete Surface
BSP09030503.GB6 (Hydro-Demolisher Only)
(BSP September 9, 2002)
Use in modified concrete overlay projects where only
hydro-demolisher scarifying machines are allowed.
BSP09030504.GB6 (Shot Blaster Only)
(BSP September 9, 2002)
Use in modified concrete overlay projects where only
shot blaster scarifying machines are allowed. Required
for all polyester concrete overlay projects.
BSP09030505.MB6 (Scarification Depth for Polyester
Concrete Overlay)
(BSP December 2, 2002)
Use in projects where polyester concrete is
required. Include with BSP090202.MB6, BSP090301011.GB6,
BSP09030201.MB6, BSP09030305.MB6,
BSP09030306.GB6, BSP09030401.GB6, BSP09030504.GB6,
BSP09030506.GB6, BSP090306C2.MB6, BSP09030803.GB6,
BSP09030804.MB6, BSP09030902.MB6, BSP09031001.MB6,
BSP09031102.MB6, BSP09031202.MB6, BSP09031302.MB6,
BSP09031401.MB6, BSP090402.MB6, BSP0905B2.GB6,
BSP0905B3.GB6, and BSP0905B4.MB6.
BSP09030506.GB6 (Epoxy-coated St. Reinf. Bars for Bridge Deck
Repair)
(BSP September 9, 2002)
Use in projects where epoxy-coated steel reinforcing
bars are required for bridge deck repair. Required
for all polyester concrete overlay projects.
BSP090306.GB6 Further Deck Preparation
BSP090306B.GB6 Deck Repair Preparation
BSP090306B1.MB6 (Forms For Full Depth Deck Repair)
(BSP August 4, 2008)
Use in modified concrete overlay projects where
the anticipated depth required for bridge deck
repair following scarification of concrete surface
may be full depth of the bridge deck.
Include with BSP0905B6.GB6.
BSP090306C.GB6 Placing Deck Repair Concrete
BSP090306C1.GB6 (Patching Concrete For Rapid Set Latex
Modified Concrete)
(BSP September 9, 2002)
Use in projects where rapid set latex modified
concrete is required. Include with either 09030501.GB6 or 09030502.GB6.
Include with BSP090201.GB6, BSP090301H1.MB6,
BSP09030304.MB6, BSP09030801.GB6, BSP09030802.MB6,
BSP09030901.GB6, BSP09031101.MB6, BSP09031201.GB6,
BSP09031301.MB6, BSP090401.GB6, BSP0905A1.MB6, and
BSP0905B1.GB6.
BSP090306C2.MB6 (Placing Patching Concrete For Polyester
Concrete Overlay)
(BSP December 2, 2002)
Use in projects where polyester concrete
is required. Include with BSP090202.MB6,
BSP090301011.GB6, BSP09030201.MB6,
BSP09030305.MB6, BSP09030306.GB6, BSP09030401.GB6,
BSP09030504.GB6, BSP09030505.MB6, BSP09030506.GB6,
BSP09030803.GB6, BSP09030804.MB6, BSP09030902.MB6,
BSP09031001.MB6, BSP09031102.MB6, BSP09031202.MB6,
BSP09031302.MB6, BSP09031401.MB6, BSP090402.MB6,
BSP0905B2.GB6, BSP0905B3.GB6, and BSP0905B4.MB6.
BSP090308.GB6 Quality Assurance
BSP09030801.GB6 (Rapid Set Latex Modified Concrete Overlay)
(BSP September 9, 2002)
Use in projects where rapid set latex modified concrete
is required. Include with either
09030501.GB6 or 09030502.GB6. Include with BSP090201.GB6,
BSP090301H1.MB6, BSP09030304.MB6, BSP090306C1.GB6,
BSP09030802.MB6, BSP09030901.GB6, BSP09031101.MB6,
BSP09031201.GB6, BSP09031301.MB6, BSP090401.GB6,
BSP0905A1.MB6, and BSP0905B1.GB6.
BSP09030802.MB6 (Rapid Set Latex Modified Concrete Trial
Overlay)
(BSP September 9, 2002)
Use in projects where rapid set latex modified concrete
is required. Include with either
09030501.GB6 or 09030502.GB6. Include with BSP090201.GB6,
BSP090301H1.MB6, BSP09030304.MB6, BSP090306C1.GB6,
BSP09030801.GB6, BSP09030901.GB6, BSP09031101.MB6,
BSP09031201.GB6, BSP09031301.MB6, BSP090401.GB6,
BSP0905A1.MB6, and BSP0905B1.GB6.
BSP09030803.GB6 (Quality Assurance For Polyester
Concrete Overlay)
(BSP December 2, 2002)
Use in projects where polyester concrete is
required. Include with BSP090202.MB6, BSP090301011.GB6,
BSP09030201.MB6, BSP09030305.MB6,
BSP09030306.GB6, BSP09030401.GB6, BSP09030504.GB6,
BSP09030505.MB6, BSP09030506.GB6, BSP090306C2.MB6,
BSP09030804.MB6, BSP09030902.MB6, BSP09031001.MB6,
BSP09031102.MB6, BSP09031202.MB6, BSP09031302.MB6,
BSP09031401.MB6, BSP090402.MB6, BSP0905B2.GB6,
BSP0905B3.GB6, and BSP0905B4.MB6.
BSP09030804.MB6 (Polyester Concrete Trial Overlay)
(BSP January 27, 2003)
Use in projects where polyester concrete is
required. Include with BSP090202.MB6, BSP090301011.GB6,
BSP09030201.MB6, BSP09030305.MB6,
BSP09030306.GB6, BSP09030401.GB6, BSP09030504.GB6,
BSP09030505.MB6, BSP09030506.GB6, BSP090306C2.MB6,
BSP09030803.GB6, BSP09030902.MB6, BSP09031001.MB6,
BSP09031102.MB6, BSP09031202.MB6, BSP09031302.MB6,
BSP09031401.MB6, BSP090402.MB6, BSP0905B2.GB6,
BSP0905B3.GB6, and BSP0905B4.MB6.
BSP090309.GB6 Mixing Concrete for Concrete Overlay
BSP09030901.GB6 (Rapid Set Latex Modified Concrete)
(BSP September 9, 2002)
Use in projects where rapid set latex modified
concrete is required.
Include with either 09030501.GB6 or 09030502.GB6.
Include with BSP090201.GB6, BSP090301H1.MB6,
BSP09030304.MB6, BSP090306C1.GB6, BSP09030801.GB6,
BSP09030802.MB6, BSP09031101.MB6, BSP09031201.GB6,
BSP09031301.MB6, BSP090401.GB6, BSP0905A1.MB6, and
BSP0905B1.GB6.
BSP09030902.MB6 (Mixing Polyester Concrete)
(BSP January 27, 2003)
Use in projects where polyester concrete is
required. Include with BSP090202.MB6, BSP090301011.GB6,
BSP09030201.MB6, BSP09030305.MB6,
BSP09030306.GB6, BSP09030401.GB6, BSP09030504.GB6,
BSP09030505.MB6, BSP09030506.GB6, BSP090306C2.MB6,
BSP09030803.GB6, BSP09030804.MB6, BSP09031001.MB6,
BSP09031102.MB6, BSP09031202.MB6, BSP09031302.MB6,
BSP09031401.MB6, BSP090402.MB6, BSP0905B2.GB6,
BSP0905B3.GB6, and BSP0905B4.MB6.
BSP090310.GB6 Overlay Profile and Screed Rails
BSP09031001.MB6 (Polyester Concrete Overlay Thickness)
(BSP January 27, 2003)
Use in projects where polyester concrete is
required. Include with BSP090202.MB6, BSP090301011.GB6,
BSP09030201.MB6, BSP09030305.MB6,
BSP09030306.GB6, BSP09030401.GB6, BSP09030504.GB6,
BSP09030505.MB6, BSP09030506.GB6, BSP090306C2.MB6,
BSP09030803.GB6, BSP09030804.MB6, BSP09030902.MB6,
BSP09031102.MB6, BSP09031202.MB6, BSP09031302.MB6,
BSP09031401.MB6, BSP090402.MB6, BSP0905B2.GB6,
BSP0905B3.GB6, and BSP0905B4.MB6.
BSP090311.GB6 Placing Concrete Overlay
BSP09031101.MB6 (Placing Rapid Set Latex Modified Concrete
Overlay)
(BSP September 9, 2002)
Use in projects where rapid set latex modified
concrete is required.
Include with either 09030501.GB6 or 09030502.GB6.
Include with BSP090201.GB6, BSP090301H1.MB6,
BSP09030304.MB6, BSP090306C1.GB6, BSP09030801.GB6,
BSP09030802.MB6, BSP09030901.GB6, BSP09031201.GB6,
BSP09031301.MB6, BSP090401.GB6, BSP0905A1.MB6, and
BSP0905B1.GB6.
BSP09031102.MB6 (Placing Polyester Concrete Overlay)
(BSP April 7, 2008)
Use in projects where polyester concrete is
required. Include with BSP090202.MB6, BSP090301011.GB6,
BSP09030201.MB6, BSP09030305.MB6,
BSP09030306.GB6, BSP09030401.GB6, BSP09030504.GB6,
BSP09030505.MB6, BSP09030506.GB6, BSP090306C2.MB6,
BSP09030803.GB6, BSP09030804.MB6, BSP09030902.MB6,
BSP09031001.MB6, BSP09031202.MB6, BSP09031302.MB6,
BSP09031401.MB6, BSP090402.MB6, BSP0905B2.GB6,
BSP0905B3.GB6, and BSP0905B4.MB6.
BSP090312.GB6 Finishing Concrete Overlay
BSP09031201.GB6 (Rapid Set Latex Modified Concrete Overlay)
(BSP September 9, 2002)
Use in projects where rapid set latex modified concrete
is required. Include with either
09030501.GB6 or 09030502.GB6. Include with BSP090201.GB6,
BSP090301H1.MB6, BSP09030304.MB6, BSP090306C1.GB6,
BSP09030801.GB6, BSP09030802.MB6, BSP09030901.GB6,
BSP09031101.MB6, BSP09031301.MB6, BSP090401.GB6,
BSP0905A1.MB6, and BSP0905B1.GB6.
BSP09031202.MB6 (Finishing Polyester Concrete Overlay)
(BSP August 1, 2005)
Use in projects where polyester concrete is
required. Include with BSP090202.MB6, BSP090301011.GB6,
BSP09030201.MB6, BSP09030305.MB6,
BSP09030306.GB6, BSP09030401.GB6, BSP09030504.GB6,
BSP09030505.MB6, BSP09030506.GB6, BSP090306C2.MB6,
BSP09030803.GB6, BSP09030804.MB6, BSP09030902.MB6,
BSP09031001.MB6, BSP09031102.MB6, BSP09031302.MB6,
BSP09031401.MB6, BSP090402.MB6, BSP0905B2.GB6,
BSP0905B3.GB6, and BSP0905B4.MB6.
BSP090313.GB6 Curing Concrete Overlay
BSP09031301.MB6 (Special Curing Requirements For Rapid Set
Latex Modified Concrete)
(BSP September 9, 2002)
Use in projects where rapid set latex modified concrete
is required. Include with either
09030501.GB6 or 09030502.GB6. Include with BSP090201.GB6,
BSP090301H1.MB6, BSP09030304.MB6, BSP090306C1.GB6,
BSP09030801.GB6, BSP09030802.MB6, BSP09030901.GB6,
BSP09031101.MB6, BSP09031201.GB6, BSP090401.GB6,
BSP0905A1.MB6, and BSP0905B1.GB6.
BSP09031302.MB6 (Curing Polyester Concrete)
(BSP December 2, 2002)
Use in projects where polyester concrete is
required. Include with BSP090202.MB6, BSP090301011.GB6,
BSP09030201.MB6, BSP09030305.MB6,
BSP09030306.GB6, BSP09030401.GB6, BSP09030504.GB6,
BSP09030505.MB6, BSP09030506.GB6, BSP090306C2.MB6,
BSP09030803.GB6, BSP09030804.MB6, BSP09030902.MB6,
BSP09031001.MB6, BSP09031102.MB6, BSP09031202.MB6,
BSP09031401.MB6, BSP090402.MB6, BSP0905B2.GB6,
BSP0905B3.GB6, and BSP0905B4.MB6.
BSP090314.GB6 Checking For Bond
BSP09031401.MB6 (Checking Polyester Concrete For
Bond)
(BSP December 2, 2002)
Use in projects where polyester concrete is
required. Include with BSP090202.MB6, BSP090301011.GB6,
BSP09030201.MB6, BSP09030305.MB6,
BSP09030306.GB6, BSP09030401.GB6, BSP09030504.GB6,
BSP09030505.MB6, BSP09030506.GB6, BSP090306C2.MB6,
BSP09030803.GB6, BSP09030804.MB6, BSP09030902.MB6,
BSP09031001.MB6, BSP09031102.MB6, BSP09031202.MB6,
BSP09031302.MB6, BSP090402.MB6, BSP0905B2.GB6,
BSP0905B3.GB6, and BSP0905B4.MB6.
BSP09031402.GB6 (Responsibility for Repair of Unbonded Modified Concrete Overlay)
(BSP April 7, 2008)
Use in projects where responsibility for the cost of
repairing unbonded modified concrete overlay is assigned
to the Contractor.
BSP0904.GB6 Measurement
BSP090401.GB6 (Rapid Set Latex Modified Concrete)
(BSP September 9, 2002)
Use in projects where rapid set latex modified concrete is
required. Include with either 09030501.GB6
or 09030502.GB6. Include with BSP090201.GB6, BSP090301H1.MB6,
BSP09030304.MB6, BSP090306C1.GB6, BSP09030801.GB6, BSP09030802.MB6,
BSP09030901.GB6, BSP09031101.MB6, BSP09031201.GB6, BSP09031301.MB6,
BSP0905A1.MB6, and BSP0905B1.GB6.
BSP090402.MB6 (Polyester Concrete Overlay)
(BSP December 2, 2002)
Use in projects where polyester concrete is
required. Include with BSP090202.MB6, BSP090301011.GB6,
BSP09030201.MB6, BSP09030305.MB6, BSP09030306.GB6,
BSP09030401.GB6, BSP09030504.GB6, BSP09030505.MB6, BSP09030506.GB6,
BSP090306C2.MB6, BSP09030803.GB6, BSP09030804.MB6, BSP09030902.MB6,
BSP09031001.MB6, BSP09031102.MB6, BSP09031202.MB6, BSP09031302.MB6,
BSP09031401.MB6, BSP0905B2.GB6, BSP0905B3.GB6, and BSP0905B4.MB6.
BSP090403.MB6 (Further Deck Preparation Measured by Area)
(BSP April 7, 2008)
Use in projects where further deck preparation is measured by area.
Include withBSP0905B5.MB6
BSP0905.GB6 Payment
BSP0905A.GB6 Must use once, preceding the following:
BSP0905A1.MB6 (Rapid Set Latex Modified Concrete)
(BSP September 9, 2002)
Use in projects where rapid set latex modified concrete is
required. Include with either 09030501.GB6
or 09030502.GB6. Include with BSP090201.GB6 BSP090301H1.MB6,
BSP09030304.MB6, BSP090306C1.GB6, BSP09030801.GB6,
BSP09030802.MB6, BSP09030901.GB6, BSP09031101.MB6,
BSP09031201.GB6, BSP09031301.MB6, BSP090401.GB6, and
BSP0905B1.GB6.
BSP0905B.GB6 Must use once, preceding one of the following: