Design: Project Development | GSP & Amendments | Division 6
DIVISION6.GR6 STRUCTURES
01.GB6 GENERAL REQUIREMENTS FOR STRUCTURES
0102.GB6 Foundation Date
010201.GB6 (Test Hole Data)
(June 26, 2000)
Use in projects with foundation test holes.
Include with 0204.FR1, and either
APPENDIX1.FR9 or APPENDIX2.FR9.
010202.GB6 (Summary of Geotechnical Conditions)
(August 6, 2001)
Use in projects where the Materials Laboratory
Geotechnical Branch has prepared a Summary of
Geotechnical Conditions to be included in the
PS&E as an Appendix to the Special Provisions.
Include with 0204.FR1, 010201.GB6, and
APPENDIX2.FR9.
0107.GB6 Navigable Streams
010701.FB6 (Navigation Lighting System)
(June 26, 2000)
Use in projects requiring installation of a
navigation lighting system. The fill-in
specifies the Bridge Number. Include
with either 070631.FB1 or 070632.GB1.
(1 fill-in)
010702.FB6 (Temporary Navigation Lighting System)
(June 26, 2000)
Use in projects requiring installation of
temporary navigation lights. The fill-in
specifies the bid item name. Include
with either 070631.FB1 or 070632.GB1.
(1 fill-in)
02031301.FB6 MODULAR EXPANSION JOINT SYSTEM
(August 4, 2008)
Include in projects requiring a modular expansion
joint system. The fill-in in Section 3.04.D specifies
the percentage of the amplified vertical load range to
be used for the horizontal load range for fatigue design.
The fill-in value shall be 20 percent except as otherwise
specified. The fill-in value shall be 50 percent for all
modular expansion joint systems installed at locations
subject to significant braking and acceleration forces or
to particularly large movement ranges. Coordination with
the Bridge and Structures Office Bearing and Expansion Joint
Specialist is required. Include with 0303301.FB6 and 070304.GB6.
(1 fill-in)
02.GR6 CONCRETE STRUCTURES
022.GR6 Materials
0221.GR6 Resin Bonded Anchors
(April 7, 2008)
Include in projects requiring resin bonded
anchors for attaching and anchoring items
to concrete structures. Must also include
02318.GR6.
02203.GB6 (Epoxy Bonding Agent For Surfaces And For Steel
Reinforcing Bar Dowels)
(December 2, 2002)
Use in projects when epoxy resin is required
for setting steel reinforcing bars into holes
drilled into concrete. Include with
02324C1.GB6 and 025C1.GB6.
02204.GB6 (Epoxy Mortar)
(December 2, 2002)
Use in projects which require the use of epoxy
mortar. Include with 02310D2.GB6 and 025A1.GB6
when coating existing bridge deck surfaces.
02209.GB6 (Epoxy Crack Sealing)
(June 26, 2000)
Use in projects which require sealing cracks in
existing concrete with injected epoxy resin.
Include with 023001.GB6, 02410.GB6, and
2510.GB6.
02210.GB6 (Exposed Aggregate Finish)
(January 7, 2008)
Use in projects requiring exposed aggregate
finish of concrete surfaces. Include with
02305A1.GB6, 0231401.GB6, 025A2.FB6, 02211.GB6 and 0231403.GB6.
02211.GB6 (Clear Sealer for Exposed Aggregate Finish)
(April 2, 2007)
Use in projects with an exposed aggregate finish.
Include with 02210.GB6, 02305A1.GB6, 0231401.GB6,
0231403.GB6 and 025A2.FB6.
02212.GB6 (Fractured Basalt Finish)
(April 7, 2008)
Use in projects requiring fractured basalt finish of concrete surfaces.
Include with 0231405.GB6, 0231409A.GB6, and 025A2.GB6.
02213.GB6 (Fractured Fin Finish)
(April 7, 2008)
Use in projects requiring fractured fin finish of
concrete surfaces. Include with 0231405.GB6,
0231406.GB6, and 025A2.FB6.
02214.GB6 (Fractured Granite Finish)
(April 7, 2008)
Use in projects requiring fractured granite finish
of concrete surfaces. Include with 0231405.GB6,
0231407.GB6, and 025A2.FB6.
02215.GB6 (Variable Depth Random Board Finish
and 3/4 inch Random Board Finish)
(April 7, 2008)
Use in projects requiring use of elastomeric, ABS,
or plastic form liners to produce random board
finish of concrete surfaces. Include with
0231405.GB6, 0231408.GB6, and 025A2.FB6.
02216A.GB6 (Ribbed Finish)
(April 7, 2008)
Use in projects requiring ribbed finish of concrete surfaces.
Include with 0231405.GB6, 0231409B.GB6, and 025A2.FB6.
02216B.GB6 (Striated Finish)
(April 7, 2008)
Use in projects requiring striated finish
of concrete surfaces.
Include with 0231405.GB6, 0231409C.GB6, and 025A2.FB6.
02217A.GB6 (Ashlar Stone Finish
(April 7, 2008)
Use in projects requiring ashlar stone finish
of concrete surfaces.
Include with 0231405.GB6, 0231409D.GB6, and 025A2.FB6.
02217B.GB6 (Block Finish)
(April 7, 2008)
Use in projects requiring block finish
of concrete surfaces.
Include with 0231405.GB6, 0231409E.GB6, and 025A2.FB6.
02217C.GB6 (Split Face Finish)
(April 7, 2008)
Use in projects requiring split face finish
of concrete surfaces.
Include with 0231405.GB6, 0231409F.GB6, and 025A2.FB6.
02218.GB6 (River Rock Finish)
(April 7, 2008)
Use in projects requiring use of river rock finish
of concrete surfaces.
Include with 0231405.GB6, 0231409G.GB6, and 025A2.FB6.
02219.GB6 (Pigmented Sealer)
(August 6, 2007)
Use in projects requiring application of pigmented sealer
to concrete surfaces. Include with 0231410.GB6 and
025A3.GB6, and appropriate companion material requirement
GSP's for each specific color of pigmented sealer
being used. Include with 022199.FB6 when more
than one pigmented sealer color is required for a project.
022191.GB6 (Washington Gray Pigmented Sealer)
(August 4, 2008)
Use in projects requiring application of
Washington Gray pigmented sealer.
Include with 02219.GB6, 0231410.GB6, and 025A3.GB6.
022192.GB6 (Mt. St. Helens Gray Pigmented Sealer)
(August 4, 2008)
Use in projects requiring application of Mt. St. Helens
Gray pigmented sealer.
Include with 02219.GB6 0231410.GB6, and 025A3.GB6.
022193.GB6 (Mt. Baker Gray Pigmented Sealer)
(August 4, 2008)
Use in projects requiring application of Mt. Baker Gray
pigmented sealer.
Include with 02219.GB6, 0231410.GB6, and 025A3.GB6.
022194.GB6 (Cascade Green Pigmented Sealer)
(August 4, 2008)
Use in projects requiring application of Cascade Green
pigmented sealer only.
Include with 02219.GB6 0231410.GB6, and 025A3.GB6.
022199.FB6 (Multiple Colors of Pigmented Sealer)
(August 4, 2008)
Use in projects requiring application of pigmented sealers
of two or more colors.
Include with 02219.GB6 0231410.GB6, and 025A3.GB6, and the
material requirment GSP for each specific color of pigmented sealer
being used. Each fill-in pair is to be used to specify the structural
features receiving a specific color of pigmented sealer.
(2 fill-ins)
02221.GB6 (Strip Seal Expansion Joint System)
(January 5, 2004)
Use in projects requiring a strip seal expansion
joint system. Include with 023132.GB6,
and 070304.GB6. Also include with
02402.FB6 and 02502.GB6 if the unit contract bid
item "Expansion Joint System Strip Seal - Superstr."
is used to pay for the work.
02222.GB6 (Compression Seal Expansion Joint System)
(June 26, 2000)
Use in projects requiring a compression seal
expansion joint system. Include with 023133.GB6.
Also include with 02402.FB6 and 02502.GB6 if the
unit contract bid item "Expansion Joint System
Compression Seal - Superstr." is used to pay for
the work.
02230.GB6 (Fabric Pad Bearing)
(August 7, 2008)
Use in projects requiring fabric pad bearings.
Include with 02319B1.GB6, 02408.FB6, 02508.GB6,
and 0303301.FB6.
02240.GB6 (Bridge Supported Utilities)
(June 26, 2000)
Must use once, preceding one of the following:
022401.GB6 (Bridge Supported Utilities)
(June 26, 2000)
Use in projects with bridge supported utilities
when the supports include concrete inserts.
Include with 0230021.GB6, 02401.FB6, and
either 025B1.FB6 or 02501.FB6.
022402.GB6 (Bridge Supported Utilities)
(April 30, 2001)
Use in projects with bridge supported utilities
when the supports include steel rods, bars, and
plates. Include with 022401.GB6, 0230021.GB6, and
02521.FB6, and either 0230022.GB6, or 0230023.FB6 and
02522.GB6.
022403.GB6 (Bridge Supported Utilities)
(June 26, 2000)
Use in projects with bridge supported utilities
when the supports include transverse braces.
Include with 022401.GB6, 022402.GB6, 0230021.GB6,
and 02521.FB6, and either 0230022.GB6, or
0230023.FB6 and 02522.GB6.
022404.GB6 (Bridge Supported Utilities)
(June 26, 2000)
Use in projects with bridge supported utilities
when the supports include pipe rolls or pipe saddles.
Include with 02521.FB6 and other applicable
bridge supported utility material and construction
requirement GSP's.
022405.GB6 (Bridge Supported Utilities)
(April 30, 2001)
Use in projects with bridge supported utilities
in concrete box girder bridges when the utilities
are supported on anchor blocks on the bottom slab.
Include with 02521.FB6 and other applicable
bridge supported utility material and construction
requirement GSP's.
02245.GB6 (Bridge Grate Inlet)
(April 30, 2001)
Use in projects with bridge grate inlets. Include
with 02411.GB6and 02511.GB6
02246.GB6 (Bridge Drain Risers)
(April 30, 2001)
Use in projects requiring the raising of bridge
drains prior to asphalt or modified concrete
overlay work on bridge decks. Include with
02310D3.GB6. Also include with 02310D4.GB6 if the
bridge deck is overlaid with membrane waterproofing
and ACP. Include with 02514.FB6 is the work is
included in the cost of the membrane waterproofing
or modified concrete overlay. Include with
02412.GB6 and 02512.GB6 if the unit contract pid
item "Modify Bridge Drain" is used to pay for the
work.
02250.GB6 (Bridge Deck Repair Concrete)
(August 4, 2008)
Use in projects where bridge deck repair is
required (except not required for bridge deck overlay
projects with modified concrete). Include with
02310D6.GB6. Include with 02415.GB6 and 02515.GB6
when the volume of work can be determined from bridge
deck survey data. Include with 02516.GB6 when the
work will be paid by force account.
023.GR6 Construction Requirements
023A.GB6 Must use once, preceding one of the following:
023001.GB6 (Epoxy Crack Sealing)
(June 26, 2000)
Use in projects which require sealing cracks in
existing concrete with injected epoxy resin.
Include with 02209.GB6, 02410.GB6, and
02510.GB6.
023002.GB6 (Bridge Supported Utilities)
(June 26, 2000)
Must use once, preceding one of the following:
0230021.GB6 (Bridge Supported Utilities)
(June 26, 2000)
Use in projects with bridge supported
utilities when the supports include
concrete inserts. Include with 02240.GB6,
022401.FB6, and either 025B1.FB6 or 02501.FB6.
0230022.GB6 (Bridge Supported Utilities)
(June 26, 2000)
Use in projects with bridge supported
utilities when the Contractor furnishes
and installs the supports and the utility
pipe or conduit pipe. Include with 02521.FB6,
0230021.GB6, 02401.FB6, and either 025B1.FB6 or
02501.FB6 when the supports include concrete
inserts.
0230023.FB6 (Bridge Supported Utilities)
(June 26, 2000)
Use in projects with bridge supported
utilities when the Utility Company furnishes,
or furnishes and installs, some of the supports
and pipe for the utilities. The first fill-in
specifies the items to be furnished and installed
by the Utility Company. The second and third
fill-ins specify the items to be installed by
the Contractor which are furnished by either the
Utility Company or the Contractor. Include
with 02521.FB6 and 02522.GB6, and other applicable
bridge supported utility material GSP's. Include
with 022401.GB6, 0230021.GB6, 02401.FB6, and
either 025B1.FB6 or 02501.FB6 when the supports
include concrete inserts.
(3 fill-ins)
023003.GB6 (Submittals)
(April 3, 2006)
Include in all projects when pH monitoring is a
condition of a NPDES construction permits, a 401
Water Quality Certification, or other permit.
Requires approval of Regional Environmental
Manager and Regional Construction Manager.
Must also use 025A4.GB6, 01031A1.GR5, 0105.GR5,
05031B.GR5, 0505.GR5, 0103A.GR8, 01031A.GR8,
and 0105.GR8.
02305.GB6 Acceptance of Concrete
02305A.GB6 General
02305A1.GB6 (Concrete Class EA)
(June 26, 2000)
Use in projects requiring concrete members
with exposed aggregate finish. Include
with 02210.GB6, 0231401.GB6, 025A2.FB6, 02211.GB6
and 0231403.GB6.
02306.GB6 Placing Concrete
02306B.GB6 Placing Concrete in Foundation Seals
02306B1.GB6 (Concrete Seals)
(June 26, 2000)
Use in projects where there is the
possibility of seals being omitted
during construction, in which case
the footing is to be lowered to
bottom of seal.
02306B2.GB6 (Concrete Seals)
(June 26, 2000)
Use in projects where there is the
possibility of seals being omitted
during construction, in which case
the footing is not to be lowered.
02310.GB6 Bridge Decks and Bridge Approach Slabs
02310D.GB6 Concrete Placement, Finishing, and Texturing
02310D1.GB6 (Repairing Slab Left Exposed After Removing
Existing Curb or Sidewalk)
(August 4, 2008)
Use in projects when existing curbs or
sidewalks are to be removed and the portion
of the slab under the curb or sidewalk that
is to remain exposed will be within two feet
from the traffic lane.
02310D2.GB6 (Repairing Slab Left Exposed After Removing
Existing Curb or Railbase)
(August 4, 2008)
Use in projects when existing curbs or
railbases are to be removed and the portion
of the slab under the curb or railbase that
is to remain exposed will be more than two
feet from the traffic lane. Include with
02204.GB6 and 025A1.GB6.
02310D3.GB6 (Bridge Drain Risers)
(August 4, 2008)
Use in projects requiring the raising of bridge
drains prior to asphalt or modified concrete
overlay work on bridge decks. Include with
02246.GB6. Include with 02310D4.GB6 if the bridge
deck is overlaid with membrane waterproofing and
ACP. Include with 02514.FB6 if the work is
included in the cost of the membrane waterproofing
or modified concrete overlay. Include with
02412.GB6 and 02512.GB6 if the unit contract bid
item "Modify Bridge Drain" is used to pay for the
work.
02310D4.GB6 (Bridge Drain Risers)
(August 4, 2008)
Use in projects requiring the raising of bridge
drains prior to membrane waterproofing and
asphalt overlay work. Include with
02246.GB6 and 02310D3.GB6. Include with 02514.FB6
if the work is included in the cost of the
membrane waterproofing. Include with 02412.GB6
and 02512.GB6 if the unit contract bid item
"Modify Bridge Drain" is used to pay for the
work.
02310D5.GB6 (Plugging Existing Bridge Drain)
(August 4, 2008)
Use in projects requiring plugging of bridge
drains. Include with 02514.FB6 if the work
is included in the cost of the membrane
waterproofing or modified concrete overlay.
Include with 02413.GB6 and 02513.GB6 if the
unit contract bid item "Plugging Existing
Bridge Drain" is used to pay for the
work.
02310D6.GB6 (Bridge Deck Repair)
(August 4, 2008)
Use in projects where bridge deck
repair is required (except not required
for bridge deck overlay projects with
modified concrete). Include with
02250.GB6. Include with 02415.GB6 and
02515.GB6 when the volume of work can be
determined from bridge deck survey data.
Include with 02516.GB6 when the work will
be paid by force account.
02310F.GB6 Bridge Approach Slab Orientation and Anchors
02310F1.GB6 (Construct pavement end of approach
slabs normal to roadway centerline)
(August 4, 2008)
Must also use 02310F4.GB6.
Use in projects when the pavement ends of
all approach slabs are constructed normal
to roadway centerline.
02310F2.GB6 (Construct pavement end of
approach slabs parallel to pavement seat)
(August 4, 2008)
Must also use 02310F4.GB6.
Use in projects when the pavement ends of all
approach slabs are constructed parallel to
the pavement seat.
02310F3.FB6 (Construct pavement end of
approach slabs both normal to the roadway
centerline and parallel to pavement seat)
(August 4, 2008)
Must also use 02310F4.GB6.
Use in projects when the pavement ends of
the approach slabs are constructed both
normal to the roadway centerline and
parallel to the pavement seat.
(2 fill-ins)
02310F4.GB6 (Compression seal requirements)
(August 4, 2008)
Must be used with 02310F1.GB6,
02310F2.GB6, or 02310F3.FB6.
02313.GB6 Expansion Joints
023132.GB6 (Strip Seal Expansion Joint System)
(June 26, 2000)
Use in projects requiring a strip seal
expansion joint system. Include with
02221.GB6, and 070304.GB6.
Also include with 02402.FB6 and 02502.GB6
if the unit contract bid item "Expansion
Joint System Strip Seal - Superstr." is
used to pay for the work.
023133.GB6 (Compression Seal Expansion Joint System)
(June 26, 2000)
Use in projects requiring a compression seal
expansion joint system. Include with
02222.GB6. Also include with 02402.FB6
and 02502.GB6 if the unit contract bid item
"Expansion Joint System Compression Seal -
Superstr." is used to pay for the work.
02314.GB6 Finishing Concrete Surfaces
0231401.GB6 (Exposed Aggregate Finish)
(June 26, 2000)
Use in projects requiring a exposed aggregate
finish of concrete surfaces. Include with
02210.GB6, 02305A1.GB6, 025A2.FB6, 02211.GB6
and 0231403.GB6.
0231402.GB6 (Containment)
(June 26, 2000)
Use in projects requiring a exposed aggregate
finish of concrete surfaces over water. Include
with 02210.GB6, 02305A1.GB6, 0231401.GB6,
025A2.FB6, 02211.GB6 and 0231403.GB6.
0231403.GB6 (Applying Clear Sealer)
(April 2, 2007)
Use in projects with an exposed aggregate finish;
Include with 02210.GB6, 02211.GB6,
02305A1.GB6, 0231401.GB6, and 025A2.FB6.
0231405.GB6 (General Requirements for Concrete Surface
Finishes Produced by Form Liners)
(June 26, 2000)
Use in projects requiring concrete surface
finishes produced by form liners. Include
with 025A2.FB6. Include with 02213.GB6 and
0231406.GB6 for fractured fin finish. Include
with 02214.GB6 and 0231407.GB6 for fractured
granite finish. Include with 02215.GB6 and
0231408.GB6 for random board finish produced
by form liners.
0231406.GB6 (Fractured Fin Finish)
(June 26, 2000)
Use in projects requiring fractured fin finish
of concrete surfaces. Include with 02213.GB6,
0231405.GB6, and 025A2.FB6.
0231407.GB6 (Fractured Granite Finish)
(June 26, 2000)
Use in projects requiring fractured granite finish
of concrete surfaces. Include with 02214.GB6,
0231405.GB6, and 025A2.FB6.
0231408.GB6 (Variable Depth Random Board Finish
and 3/4 Inch Random Board Finish)
(April 7, 2008)
Use in projects requiring use of elastomeric,
ABS, or plastic form liners to produce random
board finish of concrete surfaces. Include
with 02215.GB6, 0231405.GB6, and 025A2.FB6.
0231409.GB6 (Random Board Finish)
(June 26, 2000)
Use in projects requiring use of wooden forms
conforming to Section 6-02.3(17)J to produce
random board finish of concrete surfaces.
Include with 025A2.FB6.
0231409A.GB6 (Fractured Basalt Finish)
(April 7, 2008)
Use in projects requiring fractured basalt finish
of concrete surfaces.
Include with 02212.GB6, 0231405.GB6, and 025A2.FB6.
0231409B.GB6 (Ribbed Finish)
(August 6, 2007)
Use in projects requiring ribbed finish of concrete surfaces.
Include with 02216A.GB6, 0231405.GB6 and 025A2.FB6.
0231409C.GB6 (Striated Finish)
(August 6, 2007)
Use in projects requiring striated finish of concrete surfaces.
Include with 02216B.GB6, 0231405.GB6 and 025A2.FB6.
0231409D.GB6 (Ashlar Stone Finish)
(August 6, 2007)
Use in projects requiring ashlar stone finish of concrete surfaces.
Include with 02217A.GB6, 0231405.GB6, and 025A2.FB6.
0231409E.GB6 (Block Finish)
(August 6, 2007)
Use in projects requiring block finish of concrete surfaces.
Include with 02217B.GB6, 0231405.GB6 and 025A2.FB6..
0231409F.GB6 (Split Face Finish)
(April 7, 2008)
Use in projects requiring split face finish of concrete surfaces.
Include with 02217C.GB6, 0231405.GB6 and 025A2.FB6.
0231409G.GB6 (River Rock Finish)
(April 7, 2008)
Use in projects requiring river rock finish of concrete surfaces.
Include with 02218.GB6, 0231405.GB6, and 025A2.FB6.
0231410.GB6 (Pigmented Sealer)
(August 4, 2008)
Use in projects requiring application of
pigmented sealer to concrete surfaces.
Include with 02219.GB6 and 025A3.GB6, and
appropriate companion material requirement
GSP's for each specific color of pigmented
sealer being used. Include with 022199.FB6
when more than one pigmented sealer color is
required for a project.
02317.GB6 Falsework and Formwork
02317C.GB6 Falsework and Formwork at Special
Locations
02317C1.GB6 (Falsework Adjacent to or over Railroad
Tracks)
(June 26, 2000)
Use in bridge projects requiring falsework
adjacent to or over railroad tracks.
02317K.GB6 Concrete Forms on Steel Spans
02317K1.GB6 (Stay-in-place Metal forms for Steel Box
Girders)
(April 30, 2001)
Use in projects with steel box girder bridges
when stay-in-place metal forms are allowed
by the Bridge and Structures Office Steel
Specialist. Include with 02401.GB6,
02501.FB6, 0303151.GB6, 030328B1.GB6,
0303301.FB6, 0303391.GB6,
and 03041.FB6.
02318.GR6 Placing Anchor Bolts
(August 5, 2002)
Include in projects requiring resin bonded anchors
for attaching and anchoring items to concrete
structures. Must also include 0221.GR6.
02319.GB6 Bridge Bearings
02319B.GB6 Bridge Bearing Assemblies
02319B1.GB6 (Fabric Pad Bearing)
(April 7, 2008)
Use in projects requiring fabric pad
bearings. Include with 02230.GB6,
02408.FB6, 02508.GB6, and 0303301.FB6.
02320.GB6 Grout for Anchor Bolts and Bridge Bearings
023201.FB6 (Grout)
(June 26, 2000)
Use in projects requiring grout for structural
applications such as grout pads for beams and
girders, bridge bearing plates, post base plates,
etc. The fill-in specifies the locations where
the grout is required.
(1 fill-in)
02324.GB6 Reinforcement
02324C.GB6 Placing and Fastening
02324C1.GB6 (Drilling Holes for, and Setting, Steel
Reinforcing Bar Dowels)
(June 26, 2000)
Use in projects where holes are drilled
into existing concrete and steel reinforcing
bar dowels are set with epoxy resin.
Include with 02203.GB6 and 025C1.GB6.
Include the above with 02014.GR2, 02030207.GB2,
02035.GR2, 02324C2.GR6, and either 020512.GR2
or 020515.GR2 when extending a conc. box culvert.
02324C2.GR6 (Drilling Holes for, and Setting, Dowels
for Conc. Box Culvert Extension)
(June 26, 2000)
Use in projects requiring the extension of
an existing conc. box culvert. Include
with 02014.GR2, 02030207.GB2, 02035.GR2,
02203.GB6, 02324C1.GB6, 025C1.GB6, and either
020512.GR2 or 020515.GR2.
02326.GB6 Cast-in-Place Prestressed Concrete
023261.GB6 (Cast-in-Place Prestressed Concrete)
(June 26, 2000)
Use in projects with segmental post-tensioned
structures. Check with the Region Construction
Engineer to see if testing equipment is available.
02328.GR6 Precast Concrete Panels
023281.GR6 (Precast Reinforced Concrete Three Sided Structures)
(August 6, 2007)
At the Regions discretion, include in projects
when three sided structures less than 26 feet
are to be used. Must include 02328A1.GR6,
02328B1.GR6, 02328E1.GR6, 02328G1.GR6, 02328H1.GR6,
02328I1.GR6, and 0251.GR6.
0232811.GR6 (Approved Products(s))
(April 3, 2006)
Must only be used with the approval of E&ESC/
Hydraulics Office.
Must include with 023281.GR6, 02328A1.GR6,
02328B1.GR6, 02328E1.GR6, 02328G1.GR6, 02328H1.GR6,
02328I1.GR6, and 0251.GR6.
02328A.GR6 Shop Drawings
02328A1.GR6 Precast Reinforced Concrete Three Sided Structures
(December 2, 2002)
Must include with 023281.GR6, 02328B1.GR6, 02328E1.GR6,
02328G1.GR6, 02328H1.GR6, 02328I1.GR6, and 0251.GR6.
02328B.GR6 Casting
02328B1.GR6 Precast Reinforced Concrete Three Sided Structures
(April 30, 2001)
Must include with 02328A1.GR6, 02328E1.GR6,
02328G1.GR6, 02328H1.GR6, 02328I1.GR6, and 0251.GR6.
02328E.GR6 Finishing
02328E1.GR6 (Precast Reinforced Concrete Three Sided Structures)
(January 7, 2002)
Must include with 023281.GR6, 02328A1.GR6
02328B1.GR6, 02328G1.GR6, 02328H1.gr6, 02328I1.GR6,
and 0251.GR6.
02328G.GR6 Handling and Storage
02328G1.GR6 (Precast Reinforced Concrete Three Sided Structures)
(April 30, 2001)
Must include with 023281.GR6, 02328A1.GR6, 02328B1.GR6,
02328E1.GR6, 02328H1.GR6, 02328I1.GR6, and 0251.GR6.
02328H.GR6 Shipping
02328H1.GR6 (Precast Reinforced Concrete Three Sided Structures)
(April 30, 2001)
Must include with 023281.GR6, 02328A1.GR6, 02328B1.GR6,
02328E1.GR6, 02328G1.GR6, 02328I1.GR6, and 0251.GR6.
02328I.GR6 Erection
02328I1.GR6 (Precast Reinforced Concrete Three Sided Structures)
(April 30, 2001)
Must include with 023281.GR6, 02328A1.GR6, 02328B1.GR6,
02328E1.GR6, 02328G1.GR6, 02328H1.GR6, and 0251.GR6.
024.GB6 Measurement
02401.FB6 (Summary of Quantities for Superstructure and
Roadway Deck)
(June 26, 2000)
Use in bridge construction projects with lump sum
items for superstructure or roadway deck. The first
and third fill-in specify the appropriate bid item
name ("Superstructure - ___" or "roadway Deck - ___").
The second fill-in itemizes the approximate quantities
included. Include with 025B1.FB6 for superstructure,
and with 02501.FB6 for roadway deck.
(3 fill-ins)
02402.FB6 (Expansion Joint System)
(June 26, 2000)
Use in projects where the strip seal or compression
seal expansion joint systems are stand-alone bid
items. The fill-in specifies the type of expansion
joint system. Include with 02502.GB6, and either
02221.GB6, 023132.GB6, and 070304.GB6, or
02222.GB6 and 023133.GB6.
(1 fill-in)
02408.FB6 (Bridge Bearing Assembly)
(June 26, 2000)
Use in projects with bridge bearing assemblies.
The fill-in specifies the type of bridge bearing
assembly. Include with 02508.GB6. Include
with 02230.GB6, 02319B1.GB6, and 0303301.FB6 for
fabric pad bearings.
(1 fill-in)
02410.GB6 (Epoxy Crack Sealing)
(June 26, 2000)
Use in projects which require sealing cracks in
existing concrete with injected epoxy resin.
Include with 02209.GB6, 023001.GB6, and 02510.GB6.
02411.GB6 (Bridge Grate Inlet)
(June 26, 2000)
Use in projects with bridge grate inlets.
Include with 02245.GB6, and 02511.GB6.
02412.GB6 (Modifying Bridge Drain)
(June 26, 2000)
Use in projects where modifying bridge
drains is a stand-along bid item.
Include with 02246.GB6, 02310D3.GB6, and
02512.GB6 with modified concrete overlay projects.
Include the above with 02310D4.GB6 with membrane
waterproofing and ACP overlay projects.
02413.GB6 (Plugging Existing Bridge Drain)
(June 26, 2000)
Use in projects where plugging existing bridge
drains is a stand-along bid item. Include
with 02310D5.GB6 and 02513.GB6.
02415.GB6 (Bridge Deck Repair)
(June 26, 2000)
Use in projects where bridge deck
repair is required and when the volume of
work can be determined from the deck survey data
(except not required for bridge deck overlay
projects with modified concrete.
Include with 02250.GB6, 02310D6.GB6, and 02515.GB6.
025.GR6 Payment
025A.GB6 Must use once, preceding one of the following:
025A1.GB6 (Coating Surfaces with Epoxy Mortar)
(June 26, 2000)
Use in projects requiring coating of concrete
surfaces with epoxy mortar. Include with
02204.GB6 and 02310D2.GB6.
025A2.FB6 (Concrete Surface Finish)
(June 26, 2000)
Use in projects where concrete surfaces
receive a formed finish other than Class 1
or Class 2. The fill-in specifies the type
of formed finish. Include with the appropriate
Material and Construction Requirement GSP's for
the concrete surface finish involved.
(1 fill-in)
025A3.GB6 (Pigmented Sealer)
(June 26, 2000)
Use in projects requiring application of
pigmented sealer to concrete surfaces.
Include with 02219.GB6 and 0231410.GB6, and appropriate
companion material requirement GSP's for each
specific color of pigmented sealer being used.
Include with 022199.FB6 when more than one pigmented
sealer color is required for a project.
025A4.GB6 (Payment)
(April 3, 2006)
Must include with 023003.GB6, 01031A1.GR5, 0105.GR5,
05031B.GR5, 0505.GR5, 0103A.GR8, 01031A.GR8, and
0105.GR8.
025B.GB6 Must use once, preceding the following:
025B1.FB6 (Superstructure)
(June 26, 2000)
Use in bridge projects with lump sum items for
superstructure when payment for certain features
is to be included in the superstructure item.
The fill-in specifies work items included in
the bid item. Include with 02401.FB6.
(1 fill-in)
025C.GB6 Must use once, preceding the following:
025C1.GB6 (Drilling Holes and Setting Dowels with
Epoxy Resin)
(June 26, 2000)
Use in projects where holes are drilled into
concrete and steel reinforcing bar dowels are
set with epoxy resin. Include with 02203.GB6
and 02324C1.GB6. Include the above with
02014.GR2, 02030207.GB2, 02035.GR2, 02324C2.GR6,
and either 020512.GR2 or 020515.GR2 when
extending a conc. box culvert.
025D.GB6 Must use once, preceding one of the following:
0251.GR6 (Precast Reinforced Concrete Three Sided Structures)
(April 28, 1997)
Must include with 023281.GR6, 02328A1.GR6, 02328B1.GR6,
02328E1.GR6, 02328G1.GR6, 02328H1.GR6, and 02328I1.GR6.
02501.FB6 (Roadway Deck)
(June 26, 2000)
Use in steel bridge construction projects with
lump sum items for roadway deck. The fill-in
specifies work items included in the bid item.
Include with 02401.FB6.
(1 fill-in)
02502.GB6 (Expansion Joint System)
(June 26, 2000)
Use in projects with strip seal or compression
seal expansion joint systems when the unit
contract bid item "Expansion Joint System ___
Seal - Superstr." is used to pay for the work.
Include with 02402.FB6 and either 02221.GB6,
023132.GB6, and 070304.GB6, or
02222.GB6 and 023133.GB6.
02508.GB6 (Bridge Bearing Assembly)
(June 26, 2000)
Use in projects with bridge bearing assemblies.
Include with 02408.FB6. Include with
02230.GB6, 02319B1.GB6, and 0303301.FB6
for fabric pad bearings.
02510.GB6 (Epoxy Crack Sealing)
(June 26, 2000)
Use in projects which require sealing cracks
in existing concrete with injected epoxy resin.
Include with 02209.GB6, 023001.GB6, and 02410.GB6.
02511.GB6 (Bridge Grate Inlet)
(June 26, 2000)
Use in projects with bridge grate inlets.
Include with 02245.GB6 and 02411.GB6.
02512.GB6 (Modify Bridge Drain)
(June 26, 2000)
Use in projects where modifying bridge drains
is a stand-alone bid item. Include with
02246.GB6, 02310D3.GB6, and 02412.GB6 with
modified concrete overlay projects. Include
the above with 02310D4.GB6 with membrane
waterproofing and ACP overlay projects.
02513.GB6 (Plugging Existing Bridge Drain)
(June 26, 2000)
Use in projects where plugging existing
bridge drains is a stand-alone bid item.
Include with 02310D5.GB6 and 02413.GB6.
02514.FB6 (Modifying or Plugging Existing Bridge Drain)
(June 26, 2000)
Use in projects where payment for modifying or
plugging existing bridge drains is included
under either "Membrane Waterproofing (Deck
Seal)" or "Finishing and Curing Modified Conc.
Overlay". The first fill-in specifies whether
the work is modifying or plugging existing
bridge drains. The second fill-in specifies
appropriate pay item for the work.
Include with 02246.GB6, and 02310D3.GB6 for
modifying bridge drains with modified concrete
overlay projects. Include the above with
02310D4.GB6 for modifying bridge drains with
membrane waterproofing and ACP overlay projects.
Include with 02310D5.GB6 for plugging existing
bridge drains.
(2 fill-ins)
02515.GB6 (Bridge Deck Repair)
(June 26, 2000)
Use in projects where bridge deck
repair is required and when the volume
of work can be determined from deck survey data
(except not required for bridge deck overlay
projects with modified concrete).
Include with 02250.GB6, 02310D6.GB6, and 02415.GB6.
02516.GB6 (Bridge Deck Repair)
(June 26, 2000)
Use in projects where bridge deck
repair is also required and when the volume of
work cannot be determined because of existing overlay
(except not required for bridge deck overlay
projects with modified concrete).
Include with 02250.GB6 and 02310D6.GB6.
02520.FB6 (Bridge and Structures Minor Items)
(June 26, 2000)
Use in projects with bridges and other
structures when there are minor items that are
incidental to a lump sum or a unit price bid item.
The first fill-in specifies the minor items. The
second fill-in specifies the appropriate pay item(s)
for the minor items.
(2 fill-ins)
02521.FB6 (Bridge Supported Utilities)
(June 26, 2000)
Use in projects requiring installation of bridge
supported utilities. The first fill-in specifies the
type of utility. The second fill-in specifies the
bridge(s). The third fill-in specifies the work
performed by the Contractor (furnishing materials,
installing materials, coordination with utility, etc.),
excluding furnishing and installing inserts. The
fourth fill-in specifies the pay item. Include
with 0230022.GB6, with appropriate bridge supported
utility material GSP's, if all materials and work are
supplied and performed by the Contractor. Include
with 0230023.FB6 and 02522.GB6 if a utility company
is supplying and performing a portion of the utility
materials and work. Include with 022401.GB6,
0230021.GB6, 02401.FB6, and either 025B1.FB6 or
02501.FB6 when the supports include concrete inserts.
(4 fill-ins)
02522.GB6 (Bridge Supported Utilities)
(June 26, 2000)
Use in projects requiring installation of bridge
supported utilities where a utility company is
suppoying and performing a portion of the utility
materials and work. Include with 0230023.FB6 and
02521.FB6, and appropriate bridge supported utility
material GSP's. Include with 022401.GB6, 0230021.FB6,
02401.FB6, and either 025B1.FB6 or 02501.FB6 when the
supports include concrete inserts.
03.GB6 STEEL STRUCTURES
0303.GB6 Construction Requirements
030315.GB6 Planing of Bearing Surfaces
0303151.GB6 (Planing Bearing End of Stiffeners)
(June 26, 2000)
Use in projects with new steel bridges. Include
with 030328B1.GB6, 0303301.FB6,
0303391.GB6, 03041.FB6 and 0305A1.GB6
030328.GB6 Shop Assembly
030328A.GB6 Method of Shop Assembly
030328A1.GB6 (Progressive Transverse Shop Assembly)
(August 4, 2003)
Use in projects with new steel girder
bridges that have curved or skewed geometry,
with the concurrence of the Bridge and
Structures Office Steel Specialist.Include
with 0303151.GB6, 030328B1.GB6, 0303301.FB6,
0303391.GB6, 03041.FB6, and
0305A1.GB6.
030328B.GB6 Check of Shop Assembly
030328B1.GB6 (Check of Shop Assembly)
(June 26, 2000)
Use in projects with new steel bridges.
Include with 0303151.GB6, 0303301.FB6,
0303391.GB6, 03041.FB6, and
0305A1.GB6.
030330.GB6 Painting
0303301.FB6 (Color of Finish Coat)
(March 6, 2000)
Use in projects with new steel bridges and steel members
to cover paint color requirements by specifying the
Federal Standard 595b Color Number, or the color name
if no number. Include with 0303151.GB6, 030328B1.GB6,
0303391.GB6, 03041.FB6, and 0305A1.GB6.
Also include in projects with new minor steel items such
as steel expansion joints 02031301.FB6 or 02031302.FB6
and bearing 020317.FB6.
(1 fill-in)
030338.GB6 Placing Superstructure
0303381.GB6 (Concrete Protection)
(June 26, 2000)
Use in projects with bridges having weathering
steel superstructure members which remain
unpainted at completion of construction, and
which are above concrete surfaces which require
protection from staining while the steel members
develop their weathered protective surface.
Include with 0305B1.FB6.
030339.GB6 Swinging the Span
0303391.GB6 (Girder Camber Field Measurements)
(June 26, 2000)
Use in projects with new steel bridges.
Include with 0303151.GB6, 030328B1.GB6,
0303301.FB6, 03041.FB6, and
0305A1.GB6.
0304.GB6 Measurement
03041.FB6 (Structural Low Alloy Quantities)
(August 6, 2007)
Use in projects with new steel bridges.
Include with 0303151.GB6, 030328B1.GB6,
0303301.FB6, and 0303391.GB6.
Include with 0305A1.GB6 when the steel girder
includes a pipe railing.
(2 fill-ins)
0305.GB6 Payment
0305A.GB6 Use preceding 0305A1.GB6 only.
0305A1.GB6 (Payment for Steel Girder Railing)
(August 6, 2007)
Use in projects with new steel bridges when the
steel girder includes a pipe railing.
Include with 0303151.GB6, 030328B1.GB6,
0303301.FB6, 0303391.GB6, and
03041.FB6.
0305B.GB6 Use preceding the following:
0305B1.FB6 (Payment for Concrete Protection)
(June 26, 2000)
Use in projects with bridges have weathering
steel members which remain unpainted at the
completion of construction, and which are
above concrete surfaces which require
protection from staining while the steel
members develop their weathered protective
surface. Include with 0303381.GB6.
(1 fill-in)
04.GB6 TIMBER STRUCTURES
0403.GB6 Construction Requirements
040301.GB6 Storing and Handling Material
0403011.GB6 (Fire Prevention)
(March 6, 2000)
Use in all timber bridge construction and
timber deck replacement projects. Include
with 04051.FB6.
0403121.GB6 (Top Flange Treatment)
(March 6, 2000)
Include in timber redecking projects. Include
with 0403011.GB6, 04051.FB6, and 04052.FB6.
0405.GB6 Payment
04051.FB6 (Fire Protection)
(March 6, 2000)
Use in all timber bridge construction and timber
deck replacement projects. Include with 0403011.GB6.
(1 fill-in)
04052.FB6 (Top Flange Treatment)
(March 6, 2000)
Use in timber deck replacement projects. Include
with 0403011.GB6, 0403121.GB6, and 04051.FB6
(1 fill-in)
05.GB6 PILING
0503.GB6 Construction Requirements
050310.GB6 Test Piles
0503101.FB6 (Furnishing and Driving Test Piles)
(March 6, 2000)
Include in projects having test piles, as
recommended by the Materials Laboratory
Geotechnical Branch. The first, third, and
fourth fill-ins specify the pile type (cast-
in-place conc., steel, timber, etc.) The
second fill-in specifies the general location
(bridge and pier).
(4 fill-ins)
050311.GB6 Driving Piles
050311D.GB6 Achieving Minimum Tip Elevation and Bearing
050311D1.FB6 (Minimum Pile Tip Elevation)
(March 6, 2000)
Include in projects which have a minimum pile
tip elevation specified, as recommended by the
Materials Laboratory Geotechnical Branch. The
first fill-in specifies the pile type (cast-in-
place conc., steel, timber, etc.) The second
fill-in specifies the general location (bridge
and pier).
(2 fill-ins)
050311D2.GB6 (Vibration From Pile Driving)
(March 6, 2000)
Include in projects where minimizing vibration
from driving piles is critical, as recommended
by the Materials Laboratory Geotechnical Branch.
050311D3.FB6 (Preboring Piles)
(March 6, 2000)
Include in projects where preboring of piles is required
to prevent downdrag from settlement, as recommended
by the Materials Laboratory Geotechnical Branch. The
first fill-in specifies the general location (bridge
and pier). The third fill-in specifies the bottom
elevation of the preboring. Include with 05041.FB6
and 05051.FB6
(3 fill-ins)
050311D4.FB6 (Preboring Piles)
(March 6, 2000)
Include in projects where preboring of piles is
required, as recommended by the Materials Laboratory
Geotechnical Branch. The first fill-in specifies the
pile type (cast-in-place conc., steel, timber, etc.)
The second fill-in specifies the general location
(bridge and pier). The third fill-in specifies the
bottom elevation of the preboring. Include with
05041.FB6 and 05051.FB6.
(3 fill-ins)
0504.GB6 Measurement
05041.FB6 (Preboring Piles)
(March 6, 2000)
Use in projects where preboring of piles is required, as
recommended by the Materials Laboratory Geotechnical
Branch. The fill-in specifies the pile type (cast-in-place
conc., steel, timber, etc.) Include with 050311D3.FB6 or
050311D4.FB6, and 05051.FB6.
(1 fill-in)
0505.GB6 Payment
05051.FB6 (Preboring Piles)
(March 6, 2000)
Use in projects where preboring of piles is required, as
recommended by the Materials Laboratory Geotechnical
Branch. The fill-ins specify the pile type (cast-in-place
conc., steel, timber, etc.) Include with 050311D3.FB6 or
050311D4.FB6, and 05041.FB6.
(2 fill-ins)
06.GB6 BRIDGE RAILINGS
0602.GB6 Materials
06021.GB6 (Bridge Railing Type Chain Link Fence)
(January 5, 2004)
Use in projects with Bridge Railing Type Chain Link
Fence. Include with 0221.GR6, 02318.GR6, and 0603021.GB6.
Also include 06051.FB6 if the work is included as part
of a separate bid item such as "Superstructure - ___",
or "Roadway Deck - ___".
06022.GB6 (Bridge Railing Type Chain Link Fence)
(March 6, 2000)
Use in projects with Bridge Railing Type Chain Link
Fence where the posts are set into blockouts with
epoxy resin. Include with 0221.GR6, 02318.GR6, and
0603022.GB6. Also include 06051.FB6 if the work is
included as part of a separate bid item such as
"Superstructure - ___", or "Roadway Deck - ___".
0603.GB6 Construction Requirements
060302.GB6 Metal Railings
0603021.GB6 (Bridge Railing Type Chain Link Fence)
(March 6, 2000)
Use in projects with Bridge Railing Type Chain
Link Fence where the posts are fastened into
position with anchor bolts or resin bonded anchors.
Include with 0221.GR6, 02318.GR6, and 06021.GB6.
Also include 06051.FB6 if the work is included as
part of a separate bid item such as "Superstructure -
___", or "Roadway Deck - ___".
0603022.GB6 (Bridge Railing Type Chain Link Fence)
(March 6, 2000)
Use in projects with Bridge Railing Type Chain
Link Fence where the posts are set into blockouts
with epoxy resin. Include with 0221.GR6, 02318.GR6,
and 06021.GB6 and 06022.GB6. Also include 06051.FB6
if the work is included as part of a separate bid
item such as "Superstructure - ___", or "Roadway
Deck - ___".
0605.GB6 Payment
06051.FB6 (Bridge Railing)
(March 6, 2000)
Use in projects with Bridge Railing where the work is
included as part of a separate bid item such as
"Superstructure - ___", or "Roadway Deck - ___".
The first fill-in specifies the bridge railing type.
The second fill-in specifies the bid item name.
(2 fill-ins)
07.GB6 PAINTING
0701.GB6 Description
07011.FB6 (Scope of Work)
(March 6, 2000)
Include in projects with cleaning and painting of
existing steel bridge(s). Use to define limits of
cleaning and painting by using the second fill-in to
specify surfaces that are not to be painted (light
fixtures, utilities, bridge attachments, etc.).
Include with DESWORK2.FB1 and 070302G1.FB6. Include
with 07012.FR1 if the existing bridge(s) contain lead
paint. Include with 070632.GB1 if the bridge(s) cross
a navigable waterway.
(2 fill-ins)
07012.FB6 (Scope of Work)
(March 6, 2000)
Include in projects with cleaning and painting of
existing timber bridge(s). Use to define limits of
cleaning and painting by using the second fill-in to
specify the surfaces to be painted (railing, rail posts,
wheelguards, etc.). Include with 0703031.FB6. Include
with 07012.FR1 if the existing bridge(s) contain lead
paint.
(2 fill-ins)
0703.GB6 Construction Requirements
070302.GB6 Repainting Existing Steel Structures
0703021.GB6 Must use once, preceding one of the following:
07030211.FB6 (Utility Conduits)
(March 6, 2000)
Include only when utility conduits are
attached to the existing bridge(s) being
painted. Fill-in to read "shall or "shall
not". Include with DESWORK2.FB1, 07011.FB6
and 070302G1.FB6.
(1 fill-in)
07030212.GB6 (Light Fixtures)
(March 6, 2000)
Include only when light fixtures are attached
to existing bridge(s) being painted. Include
with DESWORK2.FB1, 07011.FB6 and 070302G1.FB6.
07030213.GB6 (Railroad Facilities)
(March 6, 2000)
Include when paint could spill or drip on
railroad right-of-way. Include with DESWORK2.FB1,
07011.FB6, 07182.FR1, either 07183.GR1 or 07184.GR1,
and 070302G1.FB6.
070302A.GB6 Bridge Cleaning
070302A1.GB6 (Cleaning Grid Deck)
(March 6, 2000)
Use with DESWORK2.FB1, 07011.FB6, 070302G1.FB6,
and 070302G2.GB6 if the bridge has a grid
roadway deck or steel grid catwalks which require
cleaning and painting.
070302G.GB6 Painting Steel Surfaces
070302G1.FB6 (Color of Finish Coat)
(March 6, 2000)
Use in projects with existing steel bridges
and bridge members to cover paint color
requirements by specifying the Federal Standard
595b Color Number, or the color name if no number.
Use with DESWORK2.FB1, and 07011.FB6. Include
with 07012.FR1 if the existing bridge(s) contain
lead paint. Include with 070632.GB1 if the
bridge(s) cross a navigable waterway.
(1 fill-in)
070302G2.GB6 (Painting Grid Deck)
(March 6, 2000)
Use with DESWORK2.FB1, 07011.FB6, 070302A1.GB6
and 070302G1.FB6 if the bridge has a grid roadway
deck or steel grid catwalks which require painting.
070303.GB6 Painting Timber Structures
0703031.FB6 (Painting Exterior Timber Surfaces)
(March 6, 2000)
Include in projects involving painting of
timber bridges. Use the third fill-in to
specify the Federal Standard 595b Color Number,
or the color name if no number. Include with
07012.FB6. Include with 07012.FR1 if the
existing bridge(s) contains lead paint.
(3 fill-ins)
070306.GB6 Protection of Public and Private Property
0703061.GB6 (Protection Of Existing Structure)
(March 6, 2000)
Use only when the bridge has mechanical
equipment to protect such as a draw bridge.
Include with DESWORK2.FB1, 07011.FB6 and
070302G1.FB6.
070304.GB6 METALLIC COATINGS
(March 30, 1992)
Include when painting with metallic
coatings is required.
08.GB6 WATERPROOFING
0801.GB6 Description
08011.GB6 (Membrane Waterproofing (Deck Seal)
(August 2, 2004)
Use in projects placing membrane waterproofing
on bridge decks prior to asphalt concrete pavement
overlay. Include with 080211.GB6, 080221.GB6,
0803021.GB6, 0803031.GB6, 0803041.GB6, 08041.GB6,
and 08051.GB6.
0802.GB6 Materials
08021.GB6 Asphalt for Waterproofing
080211.GB6 (Membrane Waterproofing Primer and Asphalt)
(August 4, 2008)
Use in all projects placing membrane waterproofing
on bridge decks prior to asphalt concrete pavement
overlay. Include with 08011.GB6, 080221.GB6,
0803021.GB6, 0803031.GB6, 0803041.GB6, 08041.GB6,
and 08051.GB6.
08022.GB6 Waterproofing Fabric
080221.GB6 (Membrane Waterproofing Membrane)
(August 4, 2008)
Use in all projects placing membrane waterproofing
on bridge decks prior to asphalt concrete pavement
overlay. Include with 08011.GB6, 080211.GB6,
0803021.GB6, 0803031.GB6, 0803041.GB6, 08041.GB6,
and 08051.GB6.
0803.GB6 Construction Requirements
080302.GB6 Preparation of Surface
0803021.GB6 (Surface Preparation)
(August 2, 2004)
Use in all projects placing membrane waterproofing
on bridge decks prior to asphalt concrete pavement
overlay. Include with 08011.GB6, 080211.GB6,
080221.GB6, 0803031.GB6, 0803041.GB6, 08041.GB6,
and 08051.GB6.
080303.GB6 Application of Waterproofing
0803031.GB6 (Applying Membrane Waterproofing)
(August 2, 2004)
Use in all projects placing membrane waterproofing
on bridge decks prior to asphalt concrete pavement
overlay. Include with 08011.GB6, 080211.GB6,
080221.GB6, 0803021.GB6, 0803041.GB6, 08041.GB6,
and 08051.GB6.
080304.GB6 Protection Course
0803041.GB6 (Membrane Protection and Asphalt Overlay)
(August 2, 2004)
Use in all projects placing membrane waterproofing
on bridge decks prior to asphalt concrete pavement
overlay. Include with 08011.GB6, 080211.GB6,
080221.GB6, 0803021.GB6, 0803031.GB6, 08041.GB6,
and 08051.GB6.
084.GB6 Measurement
08041.GB6 (Membrane Waterproofing (Deck Seal)
(March 6, 2000)
Use in all projects placing membrane waterproofing
on bridge decks prior to asphalt concrete pavement
overlay. Include with 08011.GB6, 080211.GB6,
080221.GB6, 0803021.GB6, 0803031.GB6, 0803041.GB6,
and 08051.GB6.
0805.GB6 Payment
08051.GB6 (Membrane Waterproofing (Deck Seal)
(August 2, 2004)
Use in all projects placing membrane waterproofing
on bridge decks prior to asphalt concrete pavement
overlay. Include with 08011.GB6, 080211.GB6,
080221.GB6, 0803021.GB6, 0803031.GB6, 0803041.GB6,
and 08041.GB6.
09.GB6 MODIFIED CONCRETE OVERLAYS
0903.GB6 Construction Requirements
090303.GB6 Concrete Overlay Mixes
09030301.GB6 (FMC, LMC, and MMC)
(January 7, 2002)
Use in modified concrete overlay projects where
all three concrete overlay mixes are allowed.
Include with either 09030502.GB6 or 09030501.GB6.
09030302.GB6 (FMC or LMC Only)
(January 7, 2002)
Use in modified concrete overlay projects where
only fly ash modified concrete or latex modified
concrete overlay mixes are allowed.
Include with either 09030502.GB6 or 09030501.GB6.
09030303.GB6 (LMC Only)
(January 7, 2002)
Use in modified concrete overlay projects where
only latex concrete overlay mixes are allowed.
Include with either 09030502.GB6 or 09030501.GB6.
090305.GB6 Scarifying Concrete Surface
09030501.GB6 (Rotary Mill Hydro-Demolisher, or
Shot Blaster)
(January 7, 2002)
Use in modified concrete overlay projects where
all three types of scarifying machines are allowed.
Include with 09030301.GB6, or 09030302.GB6
or 09030303.GB6.
09030502.GB6 (Hydro-Demolisher or Shot Blaster Only)
(January 7, 2002)
Use in modified concrete overlay projects where
only hydro-demolisher or shot blaster
scarifying machines are allowed.
Include with 09030301.GB6, 09030302.GB6, or
09030303.GB6.
10.GR6 CONCRETE BARRIER
1003.GR6 Contruction Requirements
100305.GR6 Temporary Concrete Barrier
1003051.GR6 (Temporary Barrier Delineators)
(March 13, 1995)
Must also use 10051.GR6.
Use in projects that require temporary
barrier to be placed adjacent to a
travelled lane.
100306.GR6 Placing Concrete Barrier
1003061.GR6 (Use Permanent Barrier as Temporary)
(March 13, 1995)
Use in projects when permanent barrier
may be used as temporary barrier.
1005.GR6 Payment
10051.GR6 (Temporary Barrier Delineators)
(April 28, 1997)
Must also use 1003051.GR6.
Use in projects that require temporary
barrier to be placed adjacent to a
travelled lane.
10053.FR6 (Bridge Concrete Barrier)
(March 6, 2000)
Use in projects with concrete barrier
on bridges only where the barrier is
included as part of a separate bid item
such as "Superstructure - ___", or
"Roadway Deck - ___". The first
fill-in specifies the barrier type
(traffic barrier, traffic-pedestrian
barrier, pedestrian barrier, etc.).
The second fill-in specifies the bid
item name..
(2 fill-ins)
12.GB6 NOISE BARRIER WALLS
1202.GB6 Materials
120201.GB6 (Precast Concrete Noise Barrier Walls)
(April 7, 2008)
Use in projects with noise barrier walls
of precast concrete panels. Include with
12030601.FB6 and all other applicable noise
barrier wall GSP's.
120202.FB6 (Masonry Noise Barrier Walls)
(April 7, 2008)
Use in projects with noise barrier walls
of masonry block panels. The fill-in describes
the surface texture and color requirements for
field, cap, accent, and other CMU blocks used
for the masonry wall. Include with
12030701.GB6 and all other applicable noise
barrier wall GSP's.
(1 fill-in)
120203.FB6 (Noise Barrier Wall Access Door)
(August 1, 2005)
Use in projects with noise barrier walls
with access doors. The fill-in specifies
the Federal Standard 595B color number, or
the color name if no number, for the paint
color of the door and door frame.
(1 fill-in)
1203.GB6 Construction Requirements
120301.GB6 (Submittals)
12030101.GB6 (Noise Barrier Wall Existing Groundline Field Survey)
(April 5, 2004)
Use in noise barrier wall projects where the
Contractor is required to perform and submit
a field survey of the existing noise barrier
wall alignment. Include with 050411.GR1,
12051.GB6, and all other applicable noise
barrier wall GSP's.
120306.GB6 Precast Concrete Panel Fabrication and Erection
12030601.FB6 (Precast Concrete Panel Surface Finish Requirements)
(April 5, 2004)
Use in projects with noise barrier walls of
precast concrete panels. The fill-ins specify
the type or name of the formed finish on the
traffic side and on the residential side of the
precast concrete panels. Include with 120201.GB6
and all other applicable noise barrier wall GSP's.
(2 fill-ins)
120307.GB6 Masonry Wall Construction
12030701.GB6 (Msonry Noise Barrier Wall Construction Requirements)
(August 6, 2007)
Use in projects with noise barrier walls of
masonry block panels. Include with 120202.FB6
and all other applicable noise barrier wall GSP's.
1205.GB6 Payment
12051.GB6 (Payment for Noise Barrier Wall Groundline Field
Survey)
(April 5, 2004)
Use in noise barrier wall projects where the Contractor
is required to perform and submit a field survey of the
existing noise barrier wall alignment. Include with
050411.GR1, 12030101.GB6, and all other applicable noise
barrier wall GSP's.
12052.GB6 (Payment for Removing Noise Barrier Wall Shaft
Obstructions)
(April 5, 2004)
Use in projects with noise barrier wall shaft
foundations.
13.GB6 STRUCTURAL EARTH WALLS
1302.GB6 Materials
130201.GB6 (Welded Wire Faced Structural Earth Wall Materials)
(April 2, 2007)
Use in projects with structural earth walls
where welded wire faced walls are
an acceptable alternative. Include with
13031.GB6 and 13030201.FB6.
130202.GB6 (Precast Concrete Panel Faced Structural Earth
Wall Materials)
(April 7, 2008)
Use in projects with structural earth walls
where precast concrete panel faced walls are
an acceptable alternative. Include with
13032.GB6, 13030201.FB6 1303401.GB6, 13030501.GB6,
and 13030701.GB6.
130203.GB6 (Concrete Block Faced Structural Earth
Wall Materials)
(April 2, 2007)
Use in projects with structural earth walls
where concrete block faced walls are
an acceptable alternative. Include with
13033.GB6, 13030201.FB6 and 13030502.GB6.
1303.GB6 Construction Requirements
13031.GB6 (Welded Wire Faced Structural Earth Wall)
(April 3, 2006)
Use in projects with structural earth walls
where welded wire faced walls are
an acceptable alternative. Include with
130201.GB6 and 13030201.FB6.
13032.GB6 (Precast Concrete Panel Faced Structural
Earth Wall)
(April 4, 2005)
Use in projects with structural earth walls
where precast concrete panel faced walls are
an acceptable alternative. Include with
130202.GB6, 13030201.FB6, 13030401.GB6,
13030501.GB6, and 13030701.GB6.
13033.GB6 (Concrete Block Faced Structural Earth
Wall)
(April 5, 2004)
Use in projects with structural earth walls
where concrete blcok faced walls are
an acceptable alternative. I